FILA Surface Care Solutions Satin Satin Finish Floor Wax, 1 QT

A good product that brightens and helps protect. I used this on my small faux stamped brick entry to give it a little sheen. This area is not in direct sunlight all day so it has proven pretty durable. The smell can be bad for lungs and I have chronic bronchitis so I wasn't willing to use this indoors as I had originally intended. The gloss is not super shiny but just enough to boost color in your stones. It seems to be a good value so far since it has been several months and right now it looks just like the day I applied it.I don't find it slippery but my concrete is not smooth at all so there is no issue.Sorry about my video and pic, it was raining out so it's hard to get the full effect of the product.For larger floor areas a roller is recommended but my area wasn't that big and I didn't have a roller handy so I painted it on while using a mask because my face was close to the product.

I have used this on a tile floor, the surface is more textured rather than smooth. It barely shows as a shine floor wax. And, it appears to wash off easily. I prefer something that will hold it's shine longer. The appearance does not show heavily shiny, so I can't be sure on protection. It comes out creamy white.

FILA 1 Quart Surface Care Solutions Satin Finish Floor Wax for Stone Floors goes down fast & lasts a long time. Following the Directions & Using the Product is Straightforward & easily done using simple hand tools. The Fila Natural Stone Wax Holds up to foot traffic better than any product that we have used in the past.

Easy to apply and surface looks good despite being a little streaky in some areas. However, it is unbelievably slippery now, even barefoot. Socks? Forget about. Buy something else. Currently looking for some sort of anti slip treatment I can top coat this with.

SLIPPERY.... This works ... almost too good. I put it on my back hall encaustic cement tile and now I can barely walk in my socks without slipping. That is some serious slippery. If that's what you want. I didn't.

I ordered this as a final step when I refinish the wood floors this summer in the house I am renting. I like that it has a low odor. The color of the fluid is milky. It doesn't look like a lot but I am pretty sure it will spread well. I am happy to use liquid wax on the hardwood floors as opposed to the actual wax I use to use at my dad's house when I was little.This bottle is 1L (1.06 qt). The label says it can be used on unpolished natural stone and agglomerates, concrete, encaustic cement tile, quarry tile, and terracotta. The label also claims it will cover up to 430 sq ft and that it can be buffed to renew or increase shine.The instructions say to apply with a lambswool or other suitable applicator then wait one hour before applying a second coat **perpendicular** to the first. The labels says the floor can be walked on after 30min.The label does give specific instructions for post-maintenance cleaning:- Cleaner Pro (CleanAll) for quarry tile, concrete, cement tile, and terrocotta- StoneClean Pro (StoneClean) for unpolished stone and agglomeratedThe label goes further and says to dillute the above solutions at 1:200 (1.5 tbsp of product per gallon of water) then buff to remove any streaks. The label also says to restore the finish once per year by applying the wax with applicators as mentioned above but that polishing is not necessary.The label says the product is not recommended for outdoor surfaces , humid environments or any place with standing water (bathrooms, showers, etc.). Application should be when temps are between 50 and 86 degrees Fahrenheit (10 to 30 degrees Celsius).I will update my review once I use it.

I apply the FILA satin finish floor wax on my tile floor. It was easy to a roll on with a roller. I brushed some of the floor wax on my tile surface. I applied 2 coats and obtain a satin finish. I applied the wax on an exterior tile floor as I did not want to apply wax on my natural tiles inside my house. This is the fall season so the sun is not hot enough to fade it out. I like the final finish. DISCLAIMER: I received this product free via Amazon's Vine Program. I am not paid to participate in the program nor paid for my review. My goal is to share honest and unbiased review of my experience with this product

WOW 🤩 — this FILA Liquid Wax is pure magic in a bottle! 🪄 I used it on my marble and terracotta floors, and the transformation was unreal — a soft satin glow that makes everything look warm, rich, and expensive 🏛️💫💧 Super easy to apply — just mop it on and let it work its magic 🙌🪨 Perfect for marble, natural stone, and quarry tile 💎✨ Leaves a gorgeous, natural sheen (not shiny, just luxurious) 😍🧼 Protects and maintains high-absorbent stone beautifully 🏠My floors now have that “museum-level” look — elegant, timeless, and totally spill-protected 👏🔥If you want your stone to look like it belongs in a Tuscan villa or a five-star spa, this is the secret. 🌿🌸

Me dejo la superficie de mi cocina excelente, si es lo que yo esperaba.