Silicone Mold Making Kit,64OZ Super Elastic Liquid Silicone for Mold Maker, Fast Cure Translucent Silicone Rubber for Casting Resins Mold,Silicone Mold,Candle Mold,Soap Mold,Food Mold

Incredibly easy to use, no need to pull a vacuum!I cannot BELIEVE how easily this product flows, fills, and sets with ZERO bubbles! It is astonishing! There are NO bubbles in the finished, hardened product.The mold I made seems durable, highly flexible, and easily picked up every detail of my model.

I am satisfied with this silicone as it's high quality and performed like every other good silicone does. The hardness is as advertised and the silicone self-debubbles so there is no need for a vacuum chamber. If your model has undercuts you'll still want to bump out any potential bubbles after curing. I've used many products and this was what I expected. I can recommend this to beginners as well as it's quite easy to mix and pour. Just make sure you don't pour it on anything containing sulfur, water or tin silicone and it should be fine. The size and value for the money are average, no big bargain here but it's worth the money.

Before anyone says anything about how their silicone didn't cure, you must know this about specifically platinum cure silicone:It is very sensitive to something called cure Inhibition! This goes for all platinum cure silicone, not just this brand. You need to make sure your work area is clean and organized, and you have to be very mindful about everything that touches your silicone. Common examples of contaminants that cause cure inhabition are rubber gloves, the rubber in gaskets such as the ones in some bottle caps and the plungers in syringes, most resins like epoxy, 3D printer, and UV (if that's what you are making a mold from) and a lot of different types of primers and finishes. You have to be extremely mindful about everything that comes in contact with platinum cure silicone.I have discovered this through trial and error and a ton of research. It's worth it to do the research because this silicone is very good. It is very strong, and it doesn't tear easily.Products that work with this silicone:- Clear Guard Sculpt Nouveau Matte Lacquer. This is a layer of protection between your model and the silicone. Spray at least 2 layers and let them dry completely for a few hours between coats. (Platinum cure silicone will have inhibition if you don't let it dry all the way.)- Silicone Free Adhesive Guru Mold Release Spray. Your silicone will absorb any mold release that is silicone based, so make sure to get silicone free mold release. Spray one layer and again, let it dry completely (an hour to be safe) before you cast.This silicone works wonderfully as long as you do your research and purchase the right products. The best way to test if a material is compatible is to drip a little mixed silicone onto it and wait to see if it cures. Don't give up!

I have ordered this product three times. I am very pleased with the ease of use. The product mixed well and is essentially bubble free. My molds turn out great and accurate. I am molding pieces with threads that screw together. The pieces that I form in these mold screw together perfectly. I gave 4 stars because my last order came with sticky jugs, gloves, tongue depressors, and the inside surface of the box. They were only about 1/4th full as if I had been sent used jugs. The outside of the box was fine. Just strange. I am in the process of sending them back and receiving a replacement.

Silicone is thick, sets evenly, and picks up fine detail. Great for resin casting.

This silicone is so easy to use and sets up really well. You have to measure each part carefully to be sure you have the exact same amount of both parts A and B. I use a small scale to be sure. Give it a couple minutes of thorough mixing and then it's ready to pour! It takes a few hours to fully set, but once it does, it will be rubbery but not super sticky. Clean up is pretty easy as well - if you have mixed solution that dripped anywhere, it will dry and can be peeled up from smooth surfaces. I wouldn't use this over carpet though!

I use this all the time. It's affordable, always sets up well and quickly with no issues with air bubbles. Very durable. Shipping is fast, too.

Because it is clear instead of pink, it is hard at all times to tell how things are lined up when you originally pour it. It is fragile and breaks easy when dry. Which again, it never really fully dried and was always sticky. There are better mold kits out there.