IMPRESA Coffee Machine Descaler - Universal Descaling Solution - 10 Uses

Truly cleans my coffee machine. I love that it comes in a big two pack. The scent isn't very strong, so the smell does not linger thankfully. I put this in my Veturo Pop machine, and it works like a dream! It removes all of the guck that was building up. Pretty fast and easy to use. If you have a Nespresso machine, I would recommend this cleaning product.

I have been using this cleaner for several years. I switched from the genuine KEURIG brand cleaner to this and have been pleased! I have a Keurig K71 Platinum Edition and Keurig K70 Platinum Edition and a newer Keurig K Elite. I also have an older Keurig K60 I gave my mother. The K71 has been in my office for years, and the Keurig K70 was in my home for many years before I bought the Elite and donated it to my work's break room. The K71 and K70 are well over 10 years old and still work like new as does the K60!. A few secrets: 1. I have ONLY ever used filtered water (Brita pitcher or filtered out of the fridge) and use charcoal reservoir filters in the water tanks on the machines (they all had the optional filter system). This keeps nasty minerals out of the machine 2. I clean them every 6 months with this descale cleaner. It's a great value and keeps them running like new! The K-Elite sees heavy use and the K-70 also saw heavy use for many years. Clean water is the key to keeping them happy and running good. I also replace the charcoal reservoir filters when I clean the machines. I only use reusable pods and fill them with my own coffee; I never use plastic single serve pods because of waste. This is a great product!

Not bad but I think i will stick to the nepresso brand

We have an ancient mini Keurig from 2013 which operates like a Hot Shot (no multi-cup water reservoir) and it had a lot of hard water residue. I poured 1/3 of the bottle and 1 c filtered water into the machine and let it sit for 15 min before lifting the handle to let it drain into the machine. I also waited another 10 min to let the descaler do its thing inside the machine. After heating and dispensing into a glass measuring cup, I repeated with filtered water four times. Most of the hard water spots disappeared and the Keurig sounds more "efficient" when brewing and dispensing. The coffee tastes much better too. I've tried descaling with white vinegar before and it took more than 8 cycles to get rid of the vinegar taste and smell. I'll be using the descaler liquid from Impresa from now on.

We first purchased Impresa Descaling Solution nearly 5 years ago, when our Keurig began having problems with dispensing. We hadn't descaled the machine at all for over one year but it was back up and running great after using the Impresa Solution. I followed the directions and noticed no aftertaste to the first cup of hot water out of the machine. A little later, we decided to upgrade to a Nespresso. Lesson learned from the Keurig was to not wait, so again the Impresa solution was used to descale and worked great with no aftertaste. Again we upgraded, this time to a Phillips LatteGo 3200. The descale light comes on, so I reached for the Impresa solution but noticed that Phillips is not included in the named brands. As others here have also noticed, there ingredients are not listed. Hmmm... After reviewing the Phillips owners manual, the section on Descaling specifically states, "Please use Philips descaler only. Under no circumstances should you use a descaler based on sulfuric acid, hydrochloric acid, sulfamic or acetic acid (vinegar) as this may damage the water circuit in your machine and not dissolve the limescale properly. Not using the Philips descaler will void your warranty." As an Engineer who began his career designing plastic and rubber parts, I knew where to find the manufacturer's ingredients. I've included a snip here of the main ingredients and their concentrations. (For those wondering what the rest of the bottle contains, it;s di-hydrogen monoxide aka water.) Now we have problem because the two main ingredients listed in Impresa's formula will specifically void your Phillips warranty. So if you're withing the 12 month warranty period and are prone to descaling your machine it could be an issue. But also highly unlikely. The only parts likely to be affected in the machine are the o-ring seals. After looking at them and doing some research, it's pretty clear they are a type of rubber called fluoroelastomer (FKM for short.) This type of rubber is good in high temps, durable, resistant to acids (including both used in the Impresa Solution), and it has a food grade version that is FDA approved. The o-rings could also be a type of silicone but that's less likely because they easily tear and attract dirt/debris. We've had our machine for 3+ year and as often as we use it, I'd expect to see small tears or cracks if they were silicone but there are none. If anyone has a spare Phillips o-ring, please stick a lighter under it and let me know the results: Silicone will burn and smell sweet. FKM will not easily burn and will stink if/when it does. So overall, I have no concerns about using Impresa Descaling Solution in my Phillips as far as impacting or damaging the machine. As far as food safety, the first ingredient is 7-10% Citric Acid. This one of the most common food additives in the entire world, and you will be hard pressed to go through your entire household and not find it as an ingredient. You will notice that it's classified as 2A which means it will irritate your eyes, the same as vinegar, lemon juice, or any other acetic acids. So it's perfectly safe unless ... you put it in your eyes. So don't do that. It will hurt. The second ingredient is 3-7% Sulfamic Acid. Sounds ominous, doesn't it? But it isn't. SA is used all over in food production for cleaning off equipment, from beer brewing and the dairy industry to ... you guessed it ... coffee and espresso shops. This is the main ingredient for removing limescale. It's rated as Category 2 Compound for both Eyes and Skin so again, don't pour it in your eyes AND don't use it as a moisturizer on your skin. It will hurt. Once it starts to hurt you're going to wash it off. And then you'll be OK. TL/DR: Great descaler for Keurigs, Nespressos, and Phillips machines. The ingredients are well-known and highly safe for use.

Alright, so I'll tell ya right now, I'm wicked excited to talk to ya about this MPRESA 10 Uses 32oz Coffee Machine Descaler. Let me tell ya, this stuff is absolute gold for keepin' yer Keurig or any single use coffee maker runnin' smooth. First off, let me just say that this stuff is easy peasy to use. Just mix it up with some water, run it through yer machine a couple times, and bam, you're good to go. It gets rid of all that nasty build-up and limescale that can gum up yer machine and make yer coffee taste like straight up garbage. I been usin' this stuff for a few weeks now, and lemme tell ya, my coffee has never tasted better. It's like I'm drinkin' coffee straight from the pearly gates themselves. Now, I know what yer thinkin', "Why do I need this stuff? Can't I just use vinegar or something?" Well lemme tell ya, this stuff is way better than vinegar. Not only does it clean yer machine better, but it leaves behind a nice fresh scent that'll make yer kitchen smell like heaven. I mean, think about it. If the end of the world was comin', wouldn't ya wanna be drinkin' the best dang coffee you ever had? Well, with this MPRESA 10 Uses 32oz Coffee Machine Descaler, you can be sure that yer coffee will be top notch, even in the midst of armageddon. So do yourself a favor and get yerself some of this stuff. Trust me, you won't be disappointed. And who knows, maybe when the end of the world does come, you'll be the only one left with a perfectly clean coffee machine and the best cup of coffee in town. Cheers, my friends. Cheers to the end of the world.

Not suitable for DeLonghi Magnifica XS espresso machine. I bought this because it specifically named DeLonghi as a supported brand, however my machine’s manual explicitly says to not use sulfamic based descalers which is one of the main ingredients of this descaling solution. I’m sure it works fine for machines that can accept sulfamic based solutions.

I have owned my Breville espresso machine for over five years now, and this descaling solution is the reason it’s still working like new. I use it for my regular cleaning maintenance, and it works perfectly every time. It is very easy to use and much more effective than just using vinegar, which can leave a weird smell or taste. This solution is odorless, rinses out clean, and ensures the internal heating elements and pumps stay free of mineral buildup. If you want to protect your investment and keep your coffee tasting fresh, I highly recommend this 2-pack. It’s a small price to pay to keep an expensive machine running for years!

Works great and easy to understand. However, Amazon mess up with my order, I only got 1 bottle instead of 2 bottles but got a full refund of this product

Producto muy efectivo de fácil aplicación y de buen precio

This stuff works and helps remove the scaling that comes from regular use in an area with hard or mineralized water. Use as the directing say because its strong stuff.

Todo excelente con éste producto, no he tenido problema con la descalcificación de mi máquina. En cuanto se enciende la luz, le hago el mantenimiento correspondiente y la luz desaparece. Es un poco costoso, sin embargo no es un producto que requieras usar tan seguido.

ya he comprado varias veces el producto ya que es necesario para mantener y prolongar la vida de la cafetera KEURING, llega a tiempo, y el precio lo considero justo.