LS1210GP 10-Port Gigabit Desktop with 8-Port PoE+ Switch , 1x Gigabit SFP Port Network Switch, 61 W PoE Budget, 30 W Output, Up to 250m Transmission, Traffic Separation, Plug & Play

Plug it in, push a cable into it, it starts working. It’s really that easy, setup the way it should be. If only everything else in life was like that. Great product, I am using it to install the new Ring doorbell with Power Over Ethernet, and it works seamlessly with no complicated setup procedures.

I originally kitted the house out with full Netgear PoE switches, such as 724s and 108s, and they ran the house beautifully for 5+ years. However, two 8-port switches and one 24-port non-green switches use about 60 watts, and even more if using PoE for cameras etc. That's the equivalent of leaving a lightbulb on day and night, which adds up over 5+ years. It adds double now that our energy utilities are scalping us on bills. So, I switched to these low-power switches. They basically just went in as drop-in replacements. No configuration required. Their ports auto-configured and everything just carried on working. I've gone from 60+Watts to about 8 watts. I've also put one of the switches on a timer because there's never anyone in one of the rooms from 11pm to 8am. I tried that with the older switches and they tended to get their knickers in a twist if you did it too often. So, on average over 24 hours the networking kit is now about 6-8 Watts instead of 50+Watts. So, doing the maths... ~50 Watts saved per hour, for 24 hours for 365 days a year is 50x24x365 = 438kWh per year. At 50p per kWh, that's £219 saved over the year, more than paying for the new kit in just 4 months in fact. In the 5 years I expect to run it, that's almost a grand if the price per kWh doesn't drop!!!! Very easy to install, very quick, very sleek and smart, and works flawlessly while saving a lot of money.

This arrived yesterday and seems to have cured an interference problem. With my previous port extender I was getting interference on a 2m FM frequency. I tried ferrite rings but to no avail. I worked out it had to be the existing port extender or it’s PSU. No problems with this one, nicely made, feels a solid construction and it may be the metal case provides some screening.

Still going strong had to power off twice but that might also be a router issue with Mac addresses

Been running this for several weeks now and it's not faltered once. It's a dream to setup (you literally just plug cables into it and power it up). It's metal so feels sturdy enough and you have some handy screw holes in the back if you wanted to mount it somewhere. The lights might be distracting.

Superb. Works great. Allows much more wired connections alongside the wireless network.

Works really well for me, just plug and play.

Excellent quality. Good quality overall does the job