Mabett Under Seat Vent Deflectors for 2021-2026 Ford Bronco 4-Door

After spending two frustrating 30 minute sessions trying to put these on the under seat vents in my Bronco Raptor, I decided to watch the customer installation videos. REALLY GOOD IDEA!!! In one video, one customer explains that the stock Bronco vents just pull right out. Game changer. These are virtually impossible to install unless you do this. They should put this in the instructions. You will fight and fight the carpet if you try and install as per instructions. But the stock vents just pull straight out (see video under reviews). Once you are holding the stock vent, just install the Mabett vent on the end of the removed vent, then install the two pieces together. The connection to the vent under the carpet tends to float up ones the extension is removed. So when you put back in the vent with the Mabett deflector attached to it, tilt the back end up to find the vent attachment, then slide it in. Easy. But not unless you remover the stock vent first. Not as good as the 2025 Bronco where they moved the vents to the back of the center arm rest/console, but definitely an improvement. Once installed, they do not hit the feet of the passengers in the back, unless a gnome is driving your car.

Fairly simple instalation. Two suggestions before attempting installing these vent deflectors: 1. slide the driver/passenger seat all the way forward for space to work and, 2. remove the rear passenger floor mats to give clearance while snapping the deflectors in place. Works great and passengers are way more comfortable now with the AC on.

These are OK and will likely work as advertised though I haven’t hit Winter yet since installing them. My only complaint is that they come in pieces and are meant to be snapped together around the existing vent to extend it. The problem is the pieces fit together poorly, and the locks do not match up adequately with the nodules on alternating pieces. Additionally, the vent cover does not stay on very well. So any nudge from a tow or moving of the seat and they fall apart. I solved all these problems by wrapping them in good old-fashioned duct tape. (after all, you can fix anything including ducts with duct tape). I thought about super glueing them together, but I think the duct tape is a much more versatile solution. I know there are other producers of this type of vent extension. Perhaps their quality is better, but I was not impressed with the quality of these. Still, I was able to make them function with some relatively inexpensive, low tech, ingenuity.

I purchased these for my brand-new 2025 Bronco. I had read a few reviews that the Broncos did not have vents in the back seat. This happens to not be the case for my bronco, however, I feel it's an extra added vent for my daughter in the back seat. It seems the inside of my Bronco traps more heat than my previous car. They are sleek and do not draw attention, so I would say they look great. The quality is as expected and is easy to remove and clean. They seem pretty durable. I do think they were a little more on the expensive side for some plastic pieces.

Do not fit a 2026 Ford Bronco. I flipped it around and tried every combo, the factory vent connection on mine are simply too wide. I would also say, even if they did fit, I dont think this is going to really help as even on a high setting, very little air comes out of these things, you can barely feel it. Far better off just pointing one of the the front vents towards the back passengers. This is more of a failing of Ford than anything, but this product will not help imo even if they did fit as intended.

Fit perfectly. Didn't help with the airflow force though. Found out through dealer that there is very little airlfow comes from these vents unless you close all the front vents

They definitely extend to where you need them! Installation was easy and straightforward. They also fit with the rubber mats I have. Just need to angle them up. Appear to be great quality and value. The kids say they now feel the airflow, so I guess they work well enough, especially for the price. Appearance seems fine and OEM-like. Now to see if the last with little legs stepping and kicking things back there.

I get the idea but they don't stay attached very well. If someone rides in the back, and their foot hits it, it pops off. When on, it does increase upward air.

I tried it and it didn’t do much the airflow was almost the same only with 2% different with it However you can adjust the front middle AC so the airflow reach the backseat this is the only solution unfortunately

No gastes en esto, no sirve, es incompatible con el recubrimiento del piso y carece de funcionalidad.

A little tricky to snap bottom and top halves together but they do go together extends under seat vents and upward angle should help heating in rear of vehicle for passengers so far so good 😊

المنتج جودته جيدة وشكلة الصراحة مناسب ولكن بجهة السائق يعتبر قصير ما يعطي مجال لخروج الهواء بشكل كامل اما جهة الراكب ف جاي مناسب جداً

I do not agree with some of these reviews. They work as intended. You need to install the bottom first, then lay the top on and snap together. The grill is the last to be installed and I am impressed with the finished product. It is simple, but effective.