YIHUA 8858 IV Multi-Purpose Heat Gun for Crafting, Electronics Soldering, DIY, Shrink Tubing and Wrap, Torch Marker and Paste, Epoxy Resin with Temperature and Air Volume Control Function, 3 Nozzles

I found the Yihua 8858 IV Multi-Purpose Heat Gun to be an excellent tool. The controls for temperature and fan speed function as expected and are well placed. The Heat Gun heats up very fast and the standby mode worked well even the Flip-Up Stand with care. I used the small nozzle and performed a SMD solder rework. My 2015 Jeep Wrangler radio had the typical cold solder FM chip problem. I set the Heat Gun at 450F and made 3 circling passes, 15s long, over the FM chip while holding downward pressure and pausing to cool. Radio is fine now. This Heat Gun is perfect for this type of use. Thank you for a great product. DMWorrel

Awesome tool for those that need help on removing old stubborn solder (like a Commodore 64 board). Works great and the attachments help me get the heat to where I want it unlike other guns that'll melt everything else but what you're trying to remove. Inexpensive and quality tool that every hobbyist and tinkerer needs.

Very nice heat gun for the price. Personally I’d like a longer cord. If you are plugging it into a more low-set outlet and the cord has to travel upwards a ways to your desk, the cord limits the gun’s maneuverability. If your outlet is close to the level you’ll be using the gun at, it’s fine.

Cheap and gets the job done, I have a soldering iron from the same company and it’s been a game changer for my soldering work. So I took a chance on this lil hot air station, mostly cause I lacked the funds for the nicer one. Although it lacks air speed, it definitely makes up for with pure heat. I used this to help me desolder and resolder a Xbox series X hdmi port, and although it was my first time doing such a job. It came out a success, yay! Naturally due to its low fan speed, you’ll have to increase the temp by a few hundred degrees to achieve the same result as a much bigger hot air station…. But if there’s a will, there’s a way. I also love how small it is, so it’s easier to stow away when I’m not doing electrical work.

It works very well, heats up fast and you can pin point the heat. I would recommend it to a friend, seems to be of high quality, easy to use. Fits in your hand nicely.

Used many times and it's going strong. Even larger heat guns I've used at work required you to set a lower temp and cool before shutting off, but this automatically cools to 200F before shutting off when you push the power button. Such a great feature that should help it last.

Very good heat gun easy to control and produces a lot of heat

Things I really like: -- I can select a precise temperature and use the narrow nozzle for spot work like heat-shrink solder connectors. -- It is lightweight -- The fan isn't so strong that it blows everything around Things I don't like: -- There is no simple high/low switch or A/B memory, and the up/down button controls are slow. Switching between two different work types is tedious. -- The large exposed hot metal area makes burning yourself easier. -- The power cord is stiff compared to the weight, so if you set it in place the cord-spring will move it.