Briidea Dirty Electricity Filters, Reduce High-Frequency Noise Caused by Electronic Devices for a Stable and Clean Power Supply for You, Extend the Lifespan of Your Electric Device, White

I have this plugged between my Anker power strip and the wall outlet and in return. I have 12 clean outlets that I can use for my audio equipment. It works and yes I’m hearing the difference. I plugged my WiiM Ultra, FiiO Warmer R2R, FiiO K15 and EDIFIER R2750DB MKII to the Anker power strip. All getting filtered and clean energy. Try it and if you’re not satisfied or hear any difference. Then return the product.

I opened it up to check what it had inside (no longer eligible for return). I bought it to keep the RF from my ham transmitter from interfering with my cable box. Anyway, what inside is a large (~24 uF) capacitor, two ceramic disc capacitors (~330 nF each), and an ineffective 330 kOhm bleeder resistor. You get ~330 nF from each side of the line to the ground pin. The bleeder is connected from L to N conductors, so when the device is unplugged, it doesn't bleed the stored charge on the capacitors. This point was mentioned in several reviews - no you know how and why it happens. There is no inductive or magnetic component in the alleged filter. The 24 uF is connected from L to N and will draw approximately 1 Amp at 120V 60 Hz. It will take the bleeder resistor about 24 seconds to discharge the capacitor, so if you touch the prongs immediately after unplugging it, you could get a substantial shock (see other reviews).I was suspicious when the mentioned "dirty electricity" in their advertising. I've been an electrical engineer for 60 years and have never encountered any dirt in electricity. I assumed they mean electricity with noise riding on it, which is quite common. In any case, the ability of the device to remove noise is likely to be limited to differential mode noise. It my remove some higher frequency noise, such as that caused by motors and contactors. One of its weaknesses is that it can only bypass the L and N to the "ground" pin; in real world noise situations the noise is often on the "ground" conductor as well as on the L and N.The case and male and female line connectors look quite good, so I used them and added my own filter in the volume where their capacitor sits. I was also be able to reuse their circuit board. My filter, a tri-filar wound toroid core, did the job for me.

I would not have guessed that a new SONY Bravia would create an electromagnetic 'storm' for a Heath Kit clock, which would jump five, ten, twenty minutes fast and / or slow within a few hours. Thank goodness for the internet. Within a few quick searches the answer was revealed : EMI could be (and was) the cause.After plugging the Bridea filter between the outlet and the existing devices (SONY, speakers, clock, etc), the clock settled down without a shutter and kept perfect time thereafter. The filter is functional, easy to install, noiseless and has excellent value. Peace of mind, too, if human exposure to EMI is an issue.

The lights in several rooms of our new home were flickering in a regular pattern. We notified the electrician under our home warranty and he narrowed the problem down to a particular device that I need to have plugged in all the time. Why this device was drawing enough power to cause the lights to flicker remains a mystery, but the electrician recommended this filter, so we thought we'd try it. As soon as I the device into the filter and the filter into the wall outlet, the flickering went away in all rooms where it was happening. It's been more than one week and the flickering hasn't returned.

Plugged in but interference continued

Bought because when I turned a radio on it would get a little get a very little static being on the same circuit. It did not clean the electric up. No change.

I bought these for my wife as a last chance choice to help her sleep through the night.We have a power plug right behind the headboard.Added these 2 devices to that plug and it worked great. Within 2 days she slept great. Woke up from the complete night's sleep.I was NOT a believer of this dirty electricity. BUT I WAS WRONG.My daughter got some for her bedroom too.

Have an air cleaner creating electrical noise.Snow on my TV did not fix the problem

Just received two of the items today. I already have 4 x Stetzeier dirty electricity devices plus StetzeMicrosurge Meter. I compared each brand in regards to amount of reduction shown in Stetzeier Microsurge Meter. These new devices reduces equal or slightly better reduction than Stetzeier devices. I am very pleased and will keep them!