Silicone Head Face Planter Mold, 8 inch Plant Pots Mold for Indoor/Outdoor, Multi -Face Shaped Succulent Flower Pots, Small Face Plante Head Planter, Art Garden Vase(Multi-face)

I used this mould with concrete. It was braced very well so the finished product came out with no bulges! Good size. Easy to take out of mould. My concrete product came out beautiful. Love this mould so I ordered another!

Great mold but a question for all users. I use cement and am sometimes having an issue with air bubbles.Any suggestions. I have used vibration but not all have worked themselves out.Thanks in advance!

Absolutely great

It's a good mold, but the base is very thick. In my opinion it doesn't need to be 1 inch! If you're good at pouring, don't fill it to the top edge of the mold.

After some failures, I managed to succeed. The product has a solid construction and is easy to use, now I share some tips:1. The concrete mix must follow what is indicated by the manufacturer, it is preferable that there be a little more concrete than sand and not the opposite.2. The concrete will work better if it is diluted enough with water, this will prevent many bubbles from forming and it will be smoother.3. Spread some type of oil on the cup-shaped piece, the part that is in contact with the silicone mold, this will make it easier to remove later.4. First, remove the piece that you greased with oil from the previous step and not the outside part (the screwed one).5. Wait at least 48 hours to remove the molds, this gives time for the concrete to be stronger.I started playing around adding concrete stain and it looks great.I hope these tips helps, greetings.

I was unsure when purchasing this how it would turn out but the mold process was fairly easy and taking it out of the mold was a breeze.

This mold is bigger than I thought even though I saw the measurements and I am totally ok with that. Love the interior and exterior supports. Now to find a flat tray that is the right size to fit this vessel size.

I put demolding spray on it, squeezed the sides, and pulled. It would not budge. I had to cut out my molded resin. I'm not wasting money on this AND wasted resin