Binardat 8 Port 10 Gigabit SFP+ Managed Switch, Supports 1G/10G SFP+ Module, 160Gbps Bandwidth, Web L3 Managed, Fanless Fiber Desktop Network Switch Metal

Am still really surprised that this is handling a segmented VLAN for our trunked home network, without a single minute of downtime over the past 3 months. The SFP+ slot was incredibly useful. Silent operation, even the power supply doesn't have the weird hum most other units have.

OK , I got these in yesterday and it took me a few moments to get connected and figure out how to save the config after I made changes, but other than that I am impressed. I haven't tested any speed yet, but I was able to trunk several vlans to and between the switches and then out to an AP without issue. I am pleased and seriously looking at the bigger versions now. If they die randomly I will update, but so far, so good.

Decent switch. Good customer service (email). Fan appears to be on 100% all the time, so there's some noise.

There is no management port, but Telnet and HTTP are both live at 192.168.2.1. The OS is a stripped down version of Cisco's CLI. If you know how to configure a Cisco, you can configure this switch. There are differences, but they don't affect this as a switch. This is my third router/switch from Binardat and I expect to buy more. Note! If you are going to use a DAC, you must set the media type of the Ethernet interface.

This review is for the 8-Port 10G L3 Managed Fiber Switch 10G08-0800GSM. I have 3 different 10G SFP switches and this is the only one I didn't get to work. Pros: * Very compact Cons: * Does not properly boot up. I can't access the web portal on 192.168.2.1 with a direct connection to the laptop which is not connected to any other network. Arp -a doesn't show the switch. The SFP module and Ethernet cable are known to be good as they work on other switches. * Gets very hot, probably because it is so compact. * Out of 4 different SFP+ ETH modules only one worked (though other switches had the same issue). Only the 10Gtek ASF-10G-T worked. I have a feeling the switch doesn't work with Broadcom chips. The following SFP+ modules didn't work: 10Gtek ASF-10G-T80, tp-link SM5310-T, ASFPTEK AT-SFP-10G-T-80 * It takes 28 seconds for the SYS LED to start blinking. This is very consistent. According to the manual, a blinking SYS LED means "Starting". So that means it does not start booting for 28s. Every other switch starts booting as soon as it gets power. * It takes 52 seconds for the connected SFP ports to be recognized. The second worst switch took 36 seconds, i.e. 16 seconds faster. * The status LEDs are below the ports. If you want to check the LEDs and the switch is not above eye level, you have to tilt it up or lift it up to see the LEDs.

I have purchased at least 4 different brands of fiber/ethernet switches and brands I have come across for my particular. application. My fiber network is runs with all Netgear switches as Netgear is the best brand for my budget. The remaining fiber/ethernet switches could be replaced with RJ45 SFPs, but I preferred to try the cheap Chinese knock-offs. I get the impression that most of the Chinese equipment has designs shared amongst many companies or families as the software interface (on manages switches) are almost the same and are all a pain in the ass to master. Oh well. You get what you pay for. I have finally settled on Binardar 4-port ethernet switched (really fiber to Ernet) to feed my NAS boxes. You may not want to follow this path as my NAS boxes do not need to be high speed, necessarily. For the High-speed, I use a Dell box with a fiber port to feed the AV data. When I come back in my next life, I will upgrade to CISCO, but, that will have to be seen... :) The brands I've tried (excluding Netgear) are Binardat, RealHD, Trendnet, and Mokerlink.

Works as expected, throughput is solid.

Excellent product. If you have any problems, contact them and they'll fix it. I had a minor issue with the firmware it came with, but they sent me a more recent firmware with fixes, and that solved the problem. It's a common issue with any device.

Este switch me ha encantado, viene acompañado de su enchufe y poco más, la verdad que no necesita nada más, es plug&play tan solo tienes que enchufarlo, conectar tus cables de ethernet, uno desde el router hasta el switch y listo, ya estarás repartiendo tu señal por cable a donde necesites (siempre que te llegue el cable claro). En mi caso lo tengo detrás de la tele dado que necesitaba como mínimo cinco conexiones y la verdad que encantado. Este switch a diferencia de muchos lleva carcasa metálica, nada de plástico como la mayoría y tiene peso, no da la sensación de que este vacío por dentro jajajajajjaa. En la parte delantera están las 9 conexiones más la entrada de corriente. En los laterales tiene salidas de aire para mantener el sistema a una temperatura 🌡️ aceptable. En la zona de abajo tiene 2 hendiduras para poder colgarlo a la pared. La potencia da hasta los 1000mb que por ahora es el máximo en España así que te será suficiente para repartir tus conexiones. ✅ Pros: 👍 Carcasa metálica, no sensación de producto chino 👍 8 puertos para repartir tu conexión 👍 Se puede colgar 👍 No más caídas del wifi 🛑 Contras: 👎 La verdad que por ahora no le veo Contras... Es algo más pesado que otros supongo que por la fuente de alimentación, espero que no se caliente demasiado pudiendo marcar la madera..

2.5Gはなかなか見つからず、それにそんなに多く有線で使用しないのでコンパクトな物を探していたので即購入。個人的には良い買い物をしたと思っている。

ルータはAterm WX11000T12、スイッチはMikroTik CRS309-1G-8S+INとCRS305-1G-4S+INを使用して、家庭内LANを10G化しています。 回線もベストエフォートですがドコモ光 10ギガです。 メインのPCやNASはSFP+やRJ45の変換モジュールを使用して10G化はしているのですが、サブや簡易用途の端末は1Gでした。 それら端末の速度は気にしていなかったのですが、最近は速度に不満がいろいろ出てきていたのと、端末が2.5Gまで対応のNICであったので、アップリンクは10G、2.5Gに対応しているポートがいくつかある中華製スイッチが少し前より出回っているのを思い出して、それらの端末を2.5G接続させるために購入してみました。 サイズを選ばなければもう少し安いのもありましたが、この無駄のない極小サイズに惹かれて衝動買いレベルです。 DHCPでIP振ってWeb管理画面入れるかと思いましたが無理そうです。 とりあえず今は何も設定をせずに設置してしまい問題なく使用出来ていますが、マニュアルに書いてある管理IPとは使用セグメントが違うので、どこかで一度設定し直さないと・・・。 一応、上位のCRS309-1G-8S+INとは10GtekのDACケーブルで接続し、下部の端末はCat7ケーブルで接続したところ、きちんと10Gと2.5Gで認識されています。素晴らしい。 今はSFP+とLAN1本しか接続していませんが、発熱は特に感じないほどです。 一応夏に備えてスイッチ類に向けてファンで風を当てていますが、付けなくても全然平気そうな発熱具合です。

Very good switch! Gets a bit hot but no issues so far!

Switch gestionado ya probado y por ahora todo perfecto. Tiene una gestión web sencilla pero muy intuitiva y de facil configuracion aunque no tiene idioma español. Tiene total compatibilidad con el transceptor SFP+ de la marca 10GTEK con puerto RJ45 multigigabit, de hecho tengo elnazados dos switches de la misma marca por puerto DFP+(este y otro de 10 puertos no gestionado). La proxima ampliacion será unir ambos switches mediante tranceptores y fibra optica, asi que cuando lo realice modificare la reseña para comentar la compatibilidad.