Phanteks NV9, Showcase Full-Tower Chassis, High Airflow Performance, Integrated D/A-RGB Lighting, Seamless Tempered Glass Design, 11x 140mm Fan Positions (Black)

A small list of pro's and con's Pro - Easily the most beautiful case I have built in - Tons of functional aesthetics - Hidden routing holes almost everywhere in this case, making the wire routing superb - Lots of room in the front of the case to RGB up and design, especially for some water cooling - Door covers and routing channels/Velcro makes cable management a breeze - Covering the routing holes and hiding them under motherboard and covers makes it one of the cleanest builds i've seen Cons - The back side of the case is small and restrictive, will easily overburden it with cables if you have too many (This was designed with D30-120 daisy chain fans or Lian li equivalent for sure) - You have to remove 1-3 panels to even get inside the front or back, which can be annoying for hotswappability - The clearance on bottom fans and MB can be very tight, I would recommend 120mm fans on bottom over 140 it says is possible as it actually bent my usb header on my MB which forced me to bend it back and reroute it. It is easily one of the best looking, and one of the better designed cases I have used. If you're expecting a large back half of the case or hot-swappability you might be slightly disappointment in this case, but as a showcase PC it will definitely deliver. I also recommend custom sleeve cables or 90 degree ATX pins to allow the grommet covers to easily fit.

I LOVE this case! with the Phanteks D30-120mm fans this is a showstopper! I am blown away at the style and cable management. The ONLY setback is if you have multiple HDD it can be tricky to maneuver the wires so that the back of the case shuts properly. Airflow was a trick to setup and planning is required if you were getting the aforementioned fans, I have 12 total: 5 regular, 7 reversed if you wanted it set up like the image. (5 reg: 2 on the back and 3 on top with the radiator, and reversed: 4 on the back wall and 3 on the bottom) There is the back of the case with combs for cable management, which is a GODSEND for anyone who wants a minimal look on top of the desk, as well as a liquid port on the rear for easy drainage (which I don't have but would absolutely love to see) The glass is sturdy and thick compared to other cases I have seen, and with RGB it looks killer. I am notorious for losing little screws, but it appears that Phanteks thought of this and with the case you get a bunch of spares. The GPU mounting kit is out of the way and study, I dont need it personally but for those with large cards its almost a must! the lights on the case are easily controlled and look seamless, the only issue I have with the case is that with the cable management and HDD ports, its tough to get a chain from your PSU to the slots allotted for HDDs. SSDs are fine and NVmE's are obviously fine, so if you don't have a HDD then this point is moot. I am just an old man apparently. lol Overall, I am completely happy with my purchase, and would recommend this case to enthusiasts that want a showstopper PC on their desk that looks as good as possible!

This case can do it all. From budget to mid-range to high-end custom builds. Room for eight 120mm fans for plenty of airflow. Excellent build quality. It'll look good for years too. I've had mine for two years and it still looks new.

Jokes aside, amazing care. Had the O11D EVO and the recent O11D EVO XL (with Lian Li fans) which I loved, but unfortunately when I got the XL, it came with some chips on the paint and scraped front panel. Returned it and thought to try something different. I am NOT disappointed. Case looks amazing, fans look good, airflow is good. Only downside I see in airflow is the back door to conceal cable management. If I open it, I feel all the air exhausting from the rear but if I close it, I feel close to no air coming out. So I kind of feel that air gets trapped and cycled back into the case. I also can't close it because of my wifi/bluetooth antennas. They are wired and if I close the door, they get crushed. Also when the fans pick up on high loads, the case creates a humming sound which can get a bit annoying but after a while, you get used to it. The RGB options are great, though I wish I could control the brightness of it. The RGB from my mobo is not the best so I keep it with its own RGB controller. This sits my EATX motherboard perfectly. No issues with the 24pin, type C cable or the GPU power cable. I did have to flip the side guard around though so it fits. But I am happy with it as it still looks nice. I have the ROG Ryujin 360 AIO and the tubes on it are short. Even when using a push pull config on the rad, the tubes are still short and have to stretch to reach the CPU mount. So I opted for just having the tubes on the rear side so they don't have to stretch with force being applied. Some AIOs have longer tubes so those work fine in any config. The assembly is the only thing I don't like. Gotta unscrew everything to get anywhere in the case. Can get tedious if you are like me and like messing around with your PC from time to time. One thing I love about Lian Li cases is their tool-less assembly accessibility. Overall I am happy with it. I love dual chamber cases and I also have a Thor 1200 PSU which is big but fits nicely in the back with room left over for cable management. Great case that I do recommend. A lot of the "issues" I have are because of what I have in my rig so I won't lower my rating just because of my personal set up. It's a great case worth the 5 stars but since it's my review and I have some issues with it because of MY personal hardware, I give it a 4. Great buy and recommended nonetheless.

I followed the directions disassembling this case and it took a few minutes and was simple. Plenty of room to install all the components and route the cables so they are all hidden. The RGB looks nice and isn't overwhelming. If you want to be blasted with RGB I would use something different. If you use fans with lights those can be seen from 5 sides. Case is real sturdy and takes a full-grown person or two to safely move. I set mine on a stand that gave me access to all sides and I didn't move it after that. Most removeable parts are thumbscrews or single cross-tip screws that are easy to access.

Questo case è fantastico! Bello, bello, bello da vedere e robusto nella sua costruzione, fatto bene internamente ha tanto spazio per mettere ventone, hard disk, ecc. L'effetto una volta montato e funzionante attraverso il vetro è spettacolare e lo vedete nelle immagini allegate. Soldi spesi benissimo!!! CONSIGLIATISSIMO !!!!!

Das Case ist einfach nur der Hammer. Hier stimmt einfach alles. Platz, Aussehen, Kabelmanagement, Airflow, Preis. Würde ich immer wieder kaufen.

Materiali di qualità, tantissimo spazio organizzato benissimo per componenti belli capienti, ha anche incorporato un resistente bracket (smontabile) per le GPU utilizzabile anche se le prendete in verticale. Ha persino un controller D-RGB, utilizzabile però solo se prendete delle ventole collegabili in daisy chain come le Phanteks (cosa che non ho fatto perché costano davvero una cannonata). Non ha ventole incluse ma sinceramente é anche meglio, come scritto sopra il pacco da 3 delle ventole Phanteks viene 140 euro, e ce ne stanno 8 nel case. Unico difetto infatti é proprio il fatto che gli accessori costano una cannonata, la staffa verticale originale 150 euro, idem per il kit "RGB premium", ho risolto rivolgendomi ad altri brand e pagando la metà .

Es muy, muy grande y espectacular, pero... El cable de la gráfica no llega, deberían avisar que al menos, ha de medir 70cm ( lo normal son 60), y las mangueras de la liquida van muy tensas (hay que girar la bomba si te es posible). No obstante, muy contento, con 8 ventiladores de 140mm, y una liquida de 280mm, la temperatura del procesador a caído 15 GRADOS!!! (mi anterior caja era una Phanteks eclipse P600s con 4 ventiladores de 140mm y la misma liquida) No exagero, estoy sorprendido.

Das weiße Case sieht mega aus! Der Preis war auch top! Dazu ist es echt stabil. Ich bin top zufrieden