SHIMANO Sora R3000 Flat bar Brake levers, Black

With the usual shimano bs. Great quality but switching pull ratios is a more annoying process than it is with the more expensive models (or the cheaper model of literally any other brand) but still really nice levers.

They’re brake levers. They appear well-made and the adjustment to V-brake pull was easy. With the Shimano T4000 brakes, the system appears excellent.

This is a full package including levers, cables, housing, housing ferrules and cable tips. Everything you need in one package. Well made and provides excellent performance and has an internal lever adjuster allowing them to be used with short or long pull brakes. For the money these really can’t be beat.

You can reposition the pivot point for the long pull or short pull. Just remove the screw in the picture.

These work for either short or long pull. They came set up for short. To change flip a lever hidden under the actuator part.Great value, as it came with two cables and plenty of housing. I used these to convert a road bike with Sram force shifters into a flat bar bike ,- specifically these pull Shimano mid reach brakes, while I have a separately mounted gx trigger shifter. My wife has smaller hands and these fit her fine.After selling the Sram brifters this replaced, I even had $$ left over .... Should have done this years ago

Decided to toss a front brake on my fixed gear and opted for this Sora levers. Got in a crash, and guess what? The lever that took the brunt is scratched up but that's IT. It still pulls flawlessly, nothing is rattling or broken.GREAT.

These work well and were easy for a 1st time installer. Quality levers! Well packaged, had instructions and cables. Complete. Happy with my purchase.!

My stock handle bars where plastic handles with limited reach and pull force on small 16" inch 305 mm ETRTO (European Tire and Rim Technical Organization) smaller than 349 mm rims and the stopping power was weak not enough to stop me riding over 20 mph on small rims. The neat ability to add disc brakes with these handlebars and added stoping power in front while in the rear i kept the rim brakes but the Sora handlebars added more leverage and reach to increase braking power even on rim brakes.

Never changed by drop handlebars to straight handlebars before. Was a little out of my depth but fitting these brake levers onto my new handlebars was a breeze. Top notch

ジャイアントのIDIOMに取り付けました。元のメーカー不明品（よく見ていない）から交換したところ、剛性感がアップしカッチリしたフィーリングになりました。ワイヤー根本の調整ネジ周りがプラなのが質感が低く残念ですが、その他全体的には質感が良いです。左右セット品にはケーブル一式が付属するのも良いですね。（アウターケーブルはM-SYSTEMでした）

普段のお散歩用ターンのミニベロのブレーキ換装。同時にブレーキシステムもシマノBR-451に交換しました。普段使用しているMTBがディスクブレーキで、当たり前ですがあまりの効きの悪さに怖くなり今回交換に至りました。交換、調整は特に問題なく、自己責任の上で自分で行いました。ターンのミニベロのキャリパーブレーキは前後ともリア用のＢＲ－４５１が必要です。お散歩用のミニベロに大金を掛けるつもりも無かったので少しでも効きが向上すればと思いましたが制動距離等は実際分かりませんが剛性は明らかに上がりタッチが格段に上がりました。あくまで標準装備のブレーキと比較ですので参考になるかは分かりませんが、コストパフォーマンスの面でも交換して正解でした。効かないブレーキは例えお散歩用のバイクといえ危険ですからね。

アルミフレームのミニベロ作成で使用SIMANOの下位グレードではあるが品質はいいワイヤーのタイコ位置変更でキャリパーブレーキにも使える。因みにブレーキ周りはこの「SORA」シリーズで固めてあるから安心だ。

コメント修正最初は使えないと書いてありましたがあれから細かく調べてみたらC/Vとあり それをセットしてVブレーキにつけたらブレーキ性能が一気に上昇です