Black TUSQ XL by Graph Tech 42mm Flat B0ttom Strat Style Nut PT-5042-00

Fits a Fesley Telecaster perfectly.TUSQ nuts are always recommended!

Great Product..

Just about 5 minutes of sanding back side. Fits into guitar fetish necks. Did not have to change string slots height perfect..

I've been sold on the Graphtech/TUSQ nuts for quite a few years now, and this one is yet another success story. I bought a "diamond in the rough" econo neck from Amazon a little while back, knowing very well it would need some TLC and elbow grease to make it go from good to great. The nut that the neck came with was the weakest link, and it was a pain to get this Graphtech nut installed, although not because of this nut in any way. The nut slot in the neck was both too deep and not wide enough. Despite that, once I got the slot all cleaned up and made a proper super-thin shim, the neck has turned out to be one of the nicest that I've played over the years (frets were dressed very well, truss rod adjusts nicely, etc.). As a plus, 42mm = no filing on the sides, at least not for this "on-spec" neck....Without this nut, the neck in question would have been mediocre at best. The stock nut was so bad that it wasn't worth even filing/sanding to work better, and there was no drop-in substitute for it - it simply made more sense to make the slot be like what you'd get from an actual Fender.Also - I typically get the white/bone GT/TUSQ nuts, but this one was for a black Tele/rosewood neck/black headstock project, and it looks really nice. I'm not super big on aesthetics, but it's an instance of non-traditional looking great (I tend to hate how graphite nuts look on maple fretboard necks, especially if they have the Old School style tuners)....This nut will probably seem expensive compared to other stuff, all things considered. When you consider that it's durable (I've got one on another guitar that's seen regular play for 10+ years w/no wear), it's (properly) pre-slotted, and the dimensions are correct (provided you do a little bit of research to get the right one), it's worth every add'l penny.

Yes I should have measured before ordering but when I saw this come up in a search for "Squier Stratocaster Nut" naturally I thought it would fit. Nope! Learned something new today. Squier strat nuts are 40 mm wide while American Strat is 42 mm wide. Wasn't looking for a new nut for my other strat but guess I have one now. Still need a good quality nut for this cheap second hand Squier that I want to make more than it was meant to be. Guess my rating is a bit harsh since it is a really nice nut but it just didn't work where I wanted it to work and wasn't looking for a new nut for my other strat.UPDATE: Originally gave this 3 stars due to not fitting the guitar I wanted it on but since putting it on my main guitar I have to admit it looks nicer than the bone nut that was on it and no adjustments needed. Perfect replacement for a 42mm wide neck. For my Squier upgrade project, ended up just using the original plastic nut. :(

This fit Ibanez Mikro ONLY after a bit of sanding. Its slightly too big and slightly too long but I sanded it (NOT TOO MUCH so be careful) But if you want a nut to fit a Mikro you can get this. Just match it up to the plastic nut from Mikro and a spot of glue and it's good to go!! Stays in tune w 9-42's.

I've installed several GraphTech nuts in countless guitars, it's an easy modification that cuts down on maintenance (which adds up if you have a lot of guitars) and ensures you won't have any tuning or binding problems, even a few years down the line.

Purchased this same nut twice. Once for the Vintera modified JM-there was some slight sanding and adjusting, and makes a great improvement over the stock nut Fender placed.(Fender-totally dropped the ball on the nut level, and string depth-over cut very badly) This one fixed the problem.works well with a 2022 Fender Vintera Jazzmaster "modified"Second purchase was for a -Squire Classic Vibe Jazzmaster (original was loose/not glued; was easy instal) No sanding was needed on mine, and fit perfectly on the Squire )did add slight glue to lock the new nut in, since nut space was cut a teeny bit wide. (also to note, original Squire nut was cut a lot better than the vintera modified/prob did not need to change it, but did it just for wanting the upgrade.