VEVOR Air Jack, 3 Ton/6600 lbs Triple Bag Air Jack, Airbag Jack with Six Steel Pipes, Lift up to 17.7 inch/450 mm, 3-5 s Fast Lifting Pneumatic Jack, with Short Handles for Car Repair

This jack works great very easy to put together straight forward instructions, would not recommend if you have a weight limit restriction jack is kind of heavy, has all the safety precautions and lefts objects up quickly and high for the size that it is. The air bag is made of durable material and has a great top piece to lift car or tractor with

Great alternative to hydraulic jacks, but just as heavy. Great performance and can lift easy. I wouldn’t use it on uneven terrain. There is not a big footprint so it’s not that stable, maybe on a slight incline. It would work great for roadside assistance workers that have compressors.

Used on garage floor due gentle floor slope and functioned well. Better than floor or bottle jack and easier to use.

I have a tall, heavy truck and this is ideal for it except for one thing. The "puck" at the top is 4 inches in diameter but the jacking points on the truck are 3 1/2 inch openings. I had to make a block to fit that opening that the jack can push against. Just be aware that this is heavy and kind of clunky to move around even with the handles. Of course, pretty much all jacks with this capacity are going to be heavy and clunky. On this model, the ball valves for input and air release are kind of close together but that is only a minor inconvenience. Another model has the handles to one side and probably a bit wider spacing.

So, I have seen some bad reviews saying how flimsy and noisy this thing is. But don't be fooled, it works fine, and I use mine almost weekly for rotating my tires, brake jobs, etc. It beats getting my floor jack out and manually pumping to get the car up in the air. I'll have to say, it's not horizontally stable; in other words, you can't jack the entire front of your car up and expect it to be stable. As long as there's a tire on the ground you should be OK. And for goodness sake, if there's any doubt use a jackstand!

Great airbag can lift Silverado 6.6 by control arms with ease Take ur time assembling unit I had to shorten the provided nylon hose to fit Do not use on dirt/grass/soft/concave surfaces will dish out bottom mounting plate without a jack plate

Works a lot better than my heavy floor jack and a lot easier to use. Good quality

What the product description doesn't tell you is that unless you get this centered absolutely perfectly under your vehicle, when it gets to the upper limits of extension it will start to go sideways/bending. That translates into your car will start moving sideways. Not a good feeling when you are underneath the car. I was using this in conjunction with my 4 post lift and had it positioned in the tray that goes between the two ramps. Bottom line, don't use it in that application and for that matter just be very careful using it at all when it can potentially go sideways, literally. Vevo=CHYNA.

no power , way to heavy not happy at all

I was excited to try this jack, but it didn't really work for me. The lift height was not enough for me to remove the tires on my Grand Cherokee. For a small car, I'm sure it would work fine, but not as convieniant as a normal floor jack.

I like vevor. These jwcks work great. There s an internal cylinder, which you can feels binds on the way down. But I'm happy with them, I bought 2.

They are a bit sloppy (difficult to lift straight up) but to lift straight up you really need 4 going at the same time on a car - so the bags / internal pipes tend to tip a little bit so far (only used once to swap tires on my son’s Subaru) worked great. I keep my compressor at like 100psi and they lift no problem at all. I’ve also used it to lift the drivers front of my ram 1500 eco diesel with no problem. So people saying they don’t lift aren’t running enough pressure to them. Really handy just slide in under a vehicle and if you have minimal space you don’t need room for a hydraulic jack and the long crank pole…..just slide it under, turn the valve and it lifts.

There’s bolt on top of the jack, when you jack the vehicle, the metal bolt touch under body, it will scrap the paint then get rust, please redesign the product, otherwise no problem