Professional Expanding Foam Spray Gun, 1 Insulation Guns + 9 Extenders | Heavy Duty Metal Body Dispensing Foam Gun insulation Applicator, Suitable for Caulking, Filling, Sealing, Heat insulation

This foam gun is durably built for the price! Fits industrial size foam cans. Set up just like other branded guns with flow control, easy can install, comes with straws and heads for the gun, works just as well without attachments. I see no difference from this gun and other name brand guns, save money and get this foam gun!

Anvil is the $30 gun sold at Home Depot. Great Stuff cans fit better, seal to the gun better and it just works better. Easier to clean and has a shut off valve to isloate the inside of the gun while changing cans. This prevents air entry and the moisture in the air "kicks off" the foam setting, which will clog your gun if you don't have this valve. While easy to take apart for cleaning, it turned out that about 5 econds spraying the gun cleaner through had the inside of this clean. Wipe down the outside with a rag that has been sprayed with the cleaner (wear latex or nitril gloves) I still recommend taking it apart to inspect that you sprayed enough cleaner. Put it back together, spray a little more cleaner and close the valve. The bad... the nozzles just press on and can blow off while spraying foam. 1 to 1.5 inch of duct tape and wrap the connection.

The Luft Professional Expanding Foam Spray Gun has been an invaluable tool for my insulation projects. This two-pack set, complete with six extenders, provides exceptional value and versatility. The heavy-duty metal body ensures durability and reliability, making these guns perfect for caulking, filling, and sealing tasks. One of the things I appreciate most is the precise control these guns offer. They allow for accurate application of expanding foam, which significantly reduces waste and mess. The extenders are particularly useful for reaching tight spots and ensuring thorough coverage. The only minor downside is that cleaning the guns can be a bit tedious, but this is a small price to pay for their overall performance and ease of use. Overall, the Luft Professional Expanding Foam Spray Gun set is a must-have for any DIY enthusiast. Its durability, precision, and versatility make it an excellent choice for a wide range of insulation and sealing projects. Highly recommended for both beginners and seasoned DIYers.

I was under impression it works with great stuff cans which is readily available everywhere around here... This thing began leaking between the gun and connection of the can. I cleaned everything out and tried again, same thing. So now 2 cans, messy gun job not done. Need to explicitly say, "does not work on great stuff cans" because it does not. I looked over the design and the hole the can nozzle is supposed to go into is round and the nozzle on great stuff has a specific type of shape that there is no way that will seal right... Cans need to have an o ring on the nozzle which great stuff branded ones do not.

Perfect tool meetings the gap filling and spraying a layer of foam on a surface. Cleans up well with the cleaner spray. No leaks using the IXIRPRO cans. Extra tips are nice, but not generally used. The basic wand offers gap filling without the risk of shooting the plastic tip into the gap.

The guns seem to be of decent quality. I did notice that the cans don't seal perfectly to the orifice and so there is a little leakage, but cleanup was easy enough with some acetone before the foam cures. I appreciate that the barbed nozzle at the end of the gun is larger than some other brands and so this one fits the pattern spray nozzles included with the many professional PU foam cans. I would advise that if you are getting the Kraken brand of foam, this gun probably will not work because Kraken uses a smaller barbed nozzle. As a tip. If you are like me and need this gun to spray foam as a sealant in between wall studs or floor joists, I'd recommend picking up some 5mm inner diameter (7mm outer diameter) hose, a brass 1/4 to 3/16 hose barb, and a pack of assorted zip ties. With these, you can attach a pattern spray nozzle that usually comes with professional polyurethane foam cans to the hose barb and attach the other end to the gun using the zip ties to add additional security to the connection. Doing so well make your life a bunch easier when trying to fan spray the foam into various spaces like the ones I mentioned above. Also, it's a good idea to either wear clothes that you plan to destroy or put on a full cover tyvek suit. Be sure to cover everything including your head and use a face shield as the foam tends to blow back a little during application and while changing canisters. Naturally, gloves are a must and I recommend using PVC coated ones, but I'm sure others would work well too. When cleaning the gun, use the special cleaners that screw onto the gun just like the foam canisters do. This is simply pressurized acetone so having a quart or gallon of that around is handy so that you can use the "cleaner" for just the interior parts of the gun and the less expensive bulk acetone for cleaning the outside and yourself. Be sure to do this cleanup before the foam cures and keep your protective gear on. I learned the hard way that messing about with the stop valve (a nice feature of these guns, by the way) can cause the expulsion of some of the foam in the gun back at you. It's better to be covered than end up with egg, I mean sticky PU foam on your face. I hope some of this helps with your buying decision as I know specific information on these guns can be hard to find and no one likes buying these only to find out that they can't use nozzle attachments that need.

Great affordable reusable foam gun. You can shut it off to prevent the handle opening and drying out the foam. Pretty solid construction and durability. Comes with wide variety of tips. I would buy it again.

There are so many different sprayers listed. I chose this one based on price and how I was going to use it. So far it has worked well. It is well-made and dependable. I had no issues with foam leaking. The only warning is the tubing that directs the foam can pop off unexpectedly. If you know this ahead of time, you can devise a better way to keep it attached. A suggestion is to buy a can of foam cleaner and use it to clean the sprayer. I haven't had the tool clog yet but that's because I clean it after each use.

Cant beat the price, works really well. Time will tell how long it'll last

Picked up this 2-pack of spray foam guns for my new construction project, and I’m really impressed. I’ve been using them for window installs and general insulation work — sealing up gaps and cracks to keep the house tight — and these are easily the best guns I’ve used so far. They feel solid, are easy to handle, and the price was way better than anything I found at the local big box stores. Each gun includes a shutoff valve that’s smooth and easy to operate, plus a flow control knob for more precise application. The kit also came with several extra tips and extension tubes for getting into tighter spots, which was a nice bonus. For the price, it’s a no-brainer. Unlike the disposable foam cans with single-use straws, these guns make it easy to pause and come back to your work later without wasting material. Highly recommended for anyone doing serious insulation work.

IT WORKED AS IT SHOULD

Good quality

Works great, Very good quality and affordable price