FVRITOVM22 26mm Carburetor Throttle Assembly Main Jets Kit for Predator 212cc 224cc 196cc Non Hemi Coleman CT200U BT200X Mini Bike KT196 Go Kart 6.5HP GX160 Clone Engine Baja MB200 Performance Parts

Revived the old go kart works great

Works great, one thing is the air filter broke and was loose. Other wise is a great carb

I installed this carb kit and a header pipe at the same time. Put these on my Coleman CT200U and it made a MASSIVE difference. With the stock carb and pipe the bike topped out somewhere around 25mph. With this carb and the added pipe (also bought from Amazon) my mini bike now does just shy of 50mph. As others have done, I installed the 110 jet and set the needle at the highest position, I will do a plug chop after about a week of running it how it is and tuning it a little better but for now the 110 works really well. Idles WAY smoother than the stock carb too. Getting the intake on in the proper orientation can be a little fiddly since there are no instructions and the intake will go on upside down (with air leaks) or go on correctly (without air leaks). My only gripe and its not really a gripe is that it would have been nice to have an orientation arrow on the intake. Other than that this carb is great for a Mikuni copy.

It’s a great carb I only had minor issues, but I resolved them by watching a YouTube video made by carsandcameras. And I can’t get it to fully idal.

I wish I could give it 0 Stars. One of the screws that holds the carburetor bowl on stripped on the first one that I ordered so I had to send it back for an exchange. The exchanged unit started leaking from the gas drain and the idle mixture screw, regardless of adjustment. There is absolutely no reason for the gas drain to have any leakage whatsoever. The gaskets included with the carburetor are terrible quality as are the materials included with the kit. Spend more money and get a significantly better quality product that will actually work. This thing is an absolute piece of junk that will waste your time, money and patience.

Just for context for all adding to predator motors, I am currently running a 212 hemi with full gov delete, MOD2 cam, billet connecting rod, alum flywheel, and thin head gasket. Out of the box, this kit went together fairly easy, and included nearly all the parts needed. For my application, the largest jet that was included (125) was not large enough. Other than that I have no major complaints. Take your time setting it up, if you are unfamiliar with these carbs, watch as many videos as you can to learn how to set it before install and how to tune. I had to order larger jets in order to fine tune mine. Seems good quality, looks great on my bike. I will be sure to update when I receive larger jets and get it dialed in.

This carb is the best vm22 clone period. I get big results with this in Colorado

I had a few problems with tuning it at first . I watched some videos on youtube . I thought it was easy to tune . I changed jets multiple times. It still would not Idol. It would run on choke. The problem with these carburetors is that you have to install them properly. The spacer that is provided has to be installed on the carb first they give you a plastic 3/8 gasket don’t use it. The reason why you have to install the carb to the spacer first so you can get it lined up properly, it’s easy to get Vacuum leak. That’s why people say that they’re junk. It’s not the carb. It’s the installer take your time and it will run right