GB-002 Multi-Way GPU Anti-Sag Bracket, ATX/E-ATX, Black

I have a 270 degree glass case and this blends well into the background while also holding my card securely. It is compact, light weight, simple to install, and doesn't break the bank. I also appreciate it can accommodate two cards. My only suggestion is they may want to include 2 additional riser standoff screws that are maybe 3 to 4mm longer to allow for maximum motherboard case compatibility, boards today are coming with ever increasing heat sinks. My board cleared perfectly with zero room to spare.

Didn't fit. If your GPU cooler is even slightly wider on the motherboard side than the width of the actual PCB, this won't work for you. Mounting the support is easy and the instructions are clear, but compatibility is going to be very hit-and-miss if you have a card with a backplate or slightly-outsized cooler.

Works, slightly overpriced and slightly annoying that it isn't easily vertically adjustable. But, works.

I installed this a few weeks ago, so I don't know how well this works long-term, but I did install it without any issues and attached the added rubber pieces such that it makes contact with the GPU, and so far it seems to be working well. Basically, there is a vertical part attaches to your motherboard through two standoff holes, and then you have an adjustable horizontal piece where you stick rubber pieces onto such that it provides extra support for the GPU. It comes with a bunch of rubber pieces of various sizes so you should be able to find the right combination for your GPU.

It did not work for my computer setup but it looks great.

Worked good for my 5090 FE. It's only a 2 slot card, but I don't want to run any risks given how much I've invested into my system. it fits my motherboard which is crucial, because the bracket that came with my case just could no fit in there no matter how I tried to make it fit. Luckily This is low profile and is basically invisble.

First and foremost, you’ll need to remove your GPU to install this. It comes with four long standoffs, but you only need two. The difference between them lies in the type of thread, in case your motherboard is threaded differently. Additionally, it includes two pieces of the GPU holding hardware, which I thought you’d be able to use to sandwich one GPU. However, there’s not enough space above the GPU to do that. The second one is actually for if you have a second GPU in your computer. It also comes with the soft pads because the screw holes don’t perfectly align with every GPU, so you can adjust for the difference using the pads and stacking them on top of each other. There are six pads total. I recommend aligning holder between the fans to avoid touching the fan blades. Overall, this is a solid product. I detest GPU holders that simply sit inside the case; this one is actually an integral part of the computer.

I have a atx board and this product is not needed for a 3 fan gpu. It’s a scam

A bit expensive for what it is, but it holds the GPU very securely and does its job well. The design is minimal and subtle, so it doesn’t stand out too much inside the case. Simple, effective, and good quality overall.

ilk zamanlar gpu tutucu neymiş gereksiz para tuzağı ürün falan diyordum fakat aradan geçen aylar sonrasında kartımın ufakta olsa sarkma yapıp kaydığını gözümle seçince bu tarz bir ürünün zorunlu olduğunu anladım. ilk başta her yerde virüs gibi yapılan aynı stl dosyasından çıkma bir sürü 3d yazıcı ürünü plastik tutucular ile tanıştım fakat bu tarz ürünler hem çok sağlam değil hemde kasayı hem görsel hem alansal açıdan eksiye düşürüyor. direkt metal bir ürün arayışına girdiğimde ise bu muazzam ürüne denk geldim. hem websitesi hem bazı yorumlarda atx desteğinden bahsedilmiş o konuya bir açıklık getirmek istiyorum buradaki atx uyumluluğunun kullandığınız anakart ile zerre ilgisi yok. buradaki kritik detay kasanızın atx uyumlu olup olmaması. çünkü bütün anakartların vida yerleşim yerleri standart ve bu standart düzene uygun bir biçimde kasa üreticileri kasalar üretiyor. şuan kullandığım sistem mAtx bir anakarta sahip fakat kasam atx uyumlu olduğu için o bahsettiğim standart hizalarda vida delikleri mevcut. zaten pek çok kasa ekstra olarak vida yükseltici de yolluyor ki buna bile gerek yok braket kutusunun içinden de bu parçalar eksiksiz ve fazlasıyla çıkıyor. bu sayede direkt standart delik konumlarına braketi vidalayıp ekran kartınızı tutturabiliyorsunuz. Bunun dışında hem demir olması hem kasa ile tek bütün bir parça gibi hareket etmesi kasada hiç sırıtmaması doğallık açısından çok kıymetli.

NÃO FUNCIONA NA ASROCK B850PRO, A PLACA DE VÍDEO NÃO ENCAIXA

It does what it's suppose to and looks like it belongs there.

Da die fette 4090 dann doch etwas durch hing, habe ich mir diesen Grafikkartenhalter, passend zu meinem Gehäuse von Lian Li, zugelegt. Bin sehr zufrieden, einfache Montage und sehr guter Halt.