Rust-Oleum 7778830-6PK High Heat Enamel Spray Paint, 12 oz Bar-B-Que Black, 6 Pack

The grease trap and my wind blocking panels for my Blackstone grill were getting pretty worn and a bit rusted. I sandblasted the parts to remove any existing paint and gave them a good clean, then applied a few coats of this and they are like new again. The paint covered nice and evenly and I expect it will hold up very well over time, but as with any paint, good prep is key. Great product for outdoor items that are exposed to the elements.

We used this Rustoluem product four years ago when restoring a roof rack on a vintage vehicle. It’s holding up great.This year we used it as part of an automotive window frame / trim restoration on a 36 year old ride. It was the final coat used after removal of minor surface rust.Very happy with the final result.

I’ve used high heat paint a number of times on my gas grill and fire pit. Each time I have been very happy with the results and continue to experience great consistency and quality with rust oleum paint.

I've got a stove, only about 5 years old, with cast iron stove grates in black. Somehow over only those 5 years, the spot that I use most with my pans has started to show some light rust color on the black. It isn't a flakey rust more than a dry discoloration. It doesn't wash off. I got this product to cosmetically improve my stove grates.I thoroughly washed my 3 grate parts in the sink-- with dish soap degreasing, and some white vineagar; scrubbing most of the parts and letting it all soak pretty good for a few hours. I let them dry outside. I tried to do a light sanding, but honestly it didn't do much for the grates. They weren't flakey and the slight rust color didn't really come off. If anything it started to show reflective silvering and I did not feel this was going in the right direction. Overall the grates were smooth already though, and cleaned. I then put them on a flattened cardboard box, also outside.The spray paint went on smooth, as you'd expect. Wear some rubber gloves, and a resporator mask + goggles if you have them. At least a face mask. This stuff gets in the air, even if the spray seems directional. I lightly tinted the problem areas, then appleid a smooth coat all over. At first I was carefully doing the bottoms, but honestly a smooth coat across the top is fine as it blends into the natural color. This is a matte/flat black finish, don't expect any sheen. This is actually the way you want it once it is dry and indoors, so this is good, don't worry. Reapply on any missed spots and then let it dry. I let mine dry multiple hours. Read the back, it will give you the dry times. But generally 1-2, 3 hrs; for dry to touch and dry to handle, etc.Now, they are back on my stove and look good overall. There is no residual smell after a day, though I wasn't really testing that fact thoroughly before. The one minor thing I noticed which gives this a 4 star instead of 5, is that when i wipe the grates down with a cloth to clean, be it wet or dry or even just a paper towel, there is a small bit of black discoloration on the cloth. It's been multiple days since. Each time I think it's gone away, I'll see it again if I rub a grate well to get something off it. The bottoms of the pans had a small dot of this black residue on it only once, and it rinsed off with a sponge. I'm just wondering if this is going to be like that forever or what.I think I read somewhere to do a 1hr cure at 200+ degrees. That may be perfect for a grill that you can just leave running but I can't put these grates in my oven and am not sure leaving the gas stove full on for an hour is best. Unclear.

I have bought and used this paint for years. I use it to touch up anything on my grill that is chipped or my fire pit or anything that is used near heat. The finish is a flat one but that is fine with me. Goes on smoothly and is very long lasting. If you need a quick fix for a heat related appliance this is it!

Weather resistant, looks nice, and dries fast. Just what I was looking for!

Excellent price and used on my Longhorn smoker

I have a gas stove and it was stained really bad around the burners. It took awhile to find the right product. I'm glad I finally did. This worked great! Covered everything. Looks brand new!

Love love the way it makes my stove look like knew there were lotta rust spots from overflowing pots love love love it

NO es brillante como dice q es, es mate y se ensucia muy fácilmente

I needed to touch up my smoker and my dual grill ash pan. Worked great. Helps prevent rust from setting in as well.

Excellent

Was great. Couldn’t find this colour anywhere else