TE DEUM 16" Satin Black Hairpin Coffee Table Legs(Set of 4), Metal Heavy Duty Sturdy Sharp Looking Modern Table Legs …

UPDATE: purchased a set of 12” legs to create a stand for our record player and records. We had a damaged cube storage shelf that I turned on it’s side and attached the legs. Fairly simple process and now I’ve given the shelf a new life, and we have a dedicated space for our record player (see third photo). For this project, I used the included screws since they were shorter than the thickness of the material I was drilling pilot holes through. After a winter storm destroyed half our first floor, we had to get rid of a lot of furniture, including a dining table and six chairs. We had another dining table given to us years ago by an old co-worker that was too red for us and had a lot of water damage on the tabletop, and was relegated to the garage for donation. Well, after we got rid of the previous table, we needed something in dining space, so I decided to refinish the table in the garage. After sanding it was starting to look good, but the legs were not sturdy. I bought these hairpin legs to replace the curvy ones that were unstable and bring the table into the modern world. The screws were difficult to turn, and stripped easily. Anyone using this should use different screws to make sure they won’t strip and be too long for their project. I used wood glue to add half-inch squares of wood where I would be attaching the legs - I didn’t want to accidentally drill through the table top I’d spent weeks sanding and oiling. The legs are great and completely change the look of the table. They are sturdy and heavy, which is good since I had to place mine in a weird place since the tabletop has two drop leaf sides. Already looking to buy a few 8-inch and 12-inch legs from this same store/seller for a coffee table and record stand.

Look, these are great and the screws they came with are perfectly fine. I guarantee 99% of the people complaining about the screws are using the wrong screwdriver, and it’s understandable. Tip #1: Use a size P3 screwdriver! Unlike nearly every Phillips screwdriver people typically have around their house (a P2, or Phillips #2), the heads of these screws are P3, or Phillips #3. What does that mean? The narrower, pointier P2 bottoms out in the screw head, preventing proper seating of the entire driver into the screw. So of course you strip them easily. Use the proper driver and you will have zero problems with them stripping out. Tip #2: I used a self-centering drill bit to drill pilot holes, but this isn’t totally necessary. It just helps make a nice clean install. A self-centering bit is amazing for cabinet hardware or any application where you might want holes drilled directly in the center of another hole. They’re cheap and oh so handy. Tip #3: Whether you use a self-centering bit or not, drill a pilot hole about 5/8” deep with about a 5/32” drill bit. Measure up 5/8” from the tip and wrap some painter’s blue tape (or any kind of tape really) around the bit so you’ll know when you’re deep enough. I went with a 5/32” bit so I knew my screws would be slightly tight. Just how I wanted them. Tip #4: I positioned each leg and then used a squeeze clamp to hold it in place while I drilled my holes. This ensures all your holes are in the right place and your leg doesn’t shift around on you while you’re drilling all 5 holes. Tip #5: Because of the angle of these legs in relation to the part you need to put screws through, it’s far more convenient to use an extension on your drill so the legs aren’t in your way. My extension is a 12” and I use it constantly so if you do anything maker-related at all, I highly recommend picking one up. You’ll thank yourself often, and again, they’re not expensive. To recap, 2 things you absolutely need for this install: 1. P3 or #3 Phillips screwdriver or bit. 2. Drill with a bit approximately the size of your screws. 5 things I highly recommend for this install to make your life easier: 1. Self-centering drill bit. 2. A 5/32” drill bit. 3. A 12” impact extension bit for your drill. 4. Painter’s tape or masking tape 5. Tape measure. Good luck. Oh, and if the legs aren’t perfectly even once you install them, you should be able to bend them a little to get them all the same height. If your leg is too tall, bend it outward. If it’s too short, bend it inward. Cheers.

Will order more, in fact I have...these are great for small tables, easy to install, look good and provide a sturdy platform.

Ok, I had low expectations on these.... and luckily those low expectations were vastly exceeded. I really wanted the kind with a third piece of metal welded in for stability, but they only appear to make those for the taller ones. So i went ahead and ordered these hoping they wouldn't be flimsy. They are SOLID. I took a very big, thick and heavy plank of solid oak and cut it into a coffee table and an end table. These legs support both, no issues. The welds are good and the hardware is good quality. Just be sure to pilot drill the screw holes. These have an awesome "mid century" look and will make your project look sleek and stylish.

These are just the greatest! I bought them in 2 different lengths, used an old outdated table that was made of solid great quality wood, hard to find these days, and made a sofa table and coffee table for us. These are so easy to install, the whole thing took less than 3 hours, counting the measuring, cutting and drilling. New furniture of incredible quality, got to reuse and extend the life of some old things which makes me happy as I try to do what I can to support sustainability. Good value all around!

I ordered these hair pin legs to use with a vintage suitcase to make a side table. Boy did they do the trick and does my table look outstanding! The legs are excellent, top-notch quality, super sturdy and heavy. The screws that came with it are also of very good quality, and I was pleasantly surprised by the little bottom pieces that fit on to give the finished product a nice even sit on the floor without wobbling, as well as prevent the bottom part of the legs from scratching into your flooring. I can't recommend these highly enough!

We were wanting to make side tables out of a tree stump and decided to use these 16” furniture legs. They came out great! Very sturdy and look high quality and they were pretty easy to install with the included screws. Definitely recommend

I absolutely love these legs! They were exactly what I was looking for and came just as I expected. The only complaint I have is the screws that came with the product were not my favorite. The metal was too soft and a couple of the screws stripped when I was trying to install the legs. I think the main issue is that it's hard to find a good position to screw in the screws. I went out to Lowe's to buy new screws and was able to install the legs just fine. I was also able to use some of the screws that came with the legs on another project (win-win!), so I really think it was just the position you need to be in to use them for the legs that causes issues. Could be user-error...but! I'm so glad this product worked out for me.

Me agradaron. Si son como la foto. Volvería a comprar

Sturdy, well-centered, nicely packed

Quick delivery, great item that did the job well. Made the table look amazing. Plastic lugs a little loose but didn’t fall off.

Very happy with these! They were easy to install and look nice! Also the cheapest I’ve seen these type of legs!

Were originally going to use wooden legs but were sold on the metal option, modern and strong.