GRAND PITSTOP Motorcycle Maintenance Stand, Portable & Compact Lift Stand Moto Jack, Adjustable Height for Chain Cleaning and Lubrication Easy to use

Works as advertised, heavy duty steel, no issues not the greatest for a slick garage floor better for a rough driveway.

Saves a lot

The Stand is not long enough to properly lift motorcycles tha thave a certain ground clearance. Also, the metal bottom slips out on concrete and likely on asphalt . Using the runber pads supplied doesnt really work either. I tried it on 2 of my 4 motorcycles, a yamaha tw200 and honda crf250l. On the ground, it worked for the tw. It did not on the crf250l. Even on the tw it barely was able to lift high enough. A piece of wood or something flatish would help lift it a bit higher. If your bikes have a lower ground clearance than dual sports then it likely will work fine except for the base getting bite to the ground.

It requires very hard effort to ever so slightly lift the rear tire. Most often than not, your whole motorycle will just drift and get pushed by the stand. This is with a Svartpilen 250, so weight shouldn't be such a factor. Don't recommend.

It does what it’s advertised to do. It gets the rear wheel off the ground. I give the stability rating a 5 purely for the type/ design, so caution should be given. Comes with a couple of rubber protectors if your on a slippery surface, and a nice leather Velcro strap to lock the front brake. Small and compact for on the go. Budget friendly for sure.

VERY DISSAPOINTED- BAD DESIGN. NOT SAFE or STABLE. I own 3 bikes and I tried this on all of them. Even tried this on my friends bikes when they rode over. I am using CAPS to highlight the very core of these problems so others won’t make the same mistake in buying this thing. I hate wasting my time and money more than anything. I bought the cheapest, within reason, that I could find that looked good and had good or decent reviews... you will see that there are a few different styles for sale out there. I bought the wrong one ! Man did I learn my lesson fast. The lowest setting makes the locking impossible over the fulcrum and will snap out and drop the bike. It happened over and over The base does not stand even with the ground so in actuality it sits on the edge of the steel channel. SAME WITH THE CRADLE CONTACT WITH THE SWINGARM...SITS ON EDGE OF THE CRADLE NOT FLUSH.. Scrap metal. FELLOW RIDERS....beware. I'll try and upload some pictures .

You will need a better piece of rubber for the end that touches the ground if you are lifting the bike on concrete or a smooth hard surface. I saved a small piece of tire sidewall rubber for this scenario. I’m surprised how well this Jack will lift most bikes. Get a helper the first time and practice before you actually need it. Now that I have the technique down, I can lift a loaded full size motorcycle. Buy name brand if you have the money, or grab this one and adapt.

Excelente producto

これ素晴らしい

A ideia do artefato ė velha, coisa que se pode fazer com um pedaço de ripa. Pode ser melhorado aumentando o esbarro na balança da moto e aumentando um pouco a ârea de contato.

Attrezzo semplice e ben disegnato, permette di sollevare la ruota posteriore per la manutenzione della catena (pulizia e ingrassaggio, non lo consiglio per lavori più complessi). ATTENZIONE: oltre a seguire le istruzioni allegate (frenare la moto con l'apposita cinghia sulla leva dell'anteriore, posizionare i pad di gomma sotto il cavalletto laterale e sotto il sollevatore), occorre regolare la lunghezza del Moto Jack adattandola alla tipologia di moto. Il sollevatore arriva regolato alla massima estensione, che potrebbe essere eccessiva per le moto stradali (il piede resta troppo inclinato e scivola impedendo il sollevamento della moto): per la mia Honda (190 kg) è stato necessario regolarlo alla lunghezza minima (riposizionando il bullone sul foro più basso) e così facendo la moto si solleva senza problemi di alcuni centimetri permettendo il movimento della ruota. Considerando il prezzo contenuto, l'ingombro minimo (che permette di portarlo con sé per una manutenzione veloce), e la qualità costruttiva, ritengo il Moto Jack un'ottima alternativa al classico ma ben più ingombrante cavalletto posteriore.

Ça marche, je peut faire l entretien de ma chaîne sans béquille centrale.

Funktioniert einwandfrei. Gute Verarbeitung, solides Material. Sehr gut, wenn man nur einen Seitenständer hat, um z.B. die Kette zu reinigen/fetten.