Nuaire Drimaster Eco Link PIV Condensation Control Bundle with Hygrometer

Description

Nuaire Drimaster Eco Link Hall Control Positive Input Ventilation Unit Comes with a hygrometer for monitoring humidity levels around the house. Style may vary. The Drimaster hall control PIV unit, utilises Nuaire technology to draw in and filter air from outside, then press the filtered fresh air through your entire home, clearing all mould and condensation. A whole house condensation solution. Compatible with optional sensors & controllers Humidity Sensor - DRI-ECO-RHCO2 Sensor - DRI-ECO-CO2Remote Monitoring - DRI-ECO-RM Condensation Dampness Is A Fast Growing Problem! It is estimated that the one in five houses in the UK are poorly ventilated. Leading to problems with streaming windows, mould growth and poor indoor air quality. Tenant lifestyles are a major factor. Average family produces up to 10 litres of water per day. Simply by cooking, washing and bathing. Condensation Season During the winter you are more likely to dry clothes inside and keep windows closed so heat is not wasted. Excess moisture is absorbed in to the air. It naturally travels to the coldest part of the house and condenses on cool surfaces such as windows and walls. Homes that have cold spots or are not properly heated due to fuel poverty are premed to condensation dampness. So What Is The Solution? The most effective way to solve a condensation and mould problem once and for all is by increasing the level of ventilation in your property. Nuaire Invented Piv Over 40 Years Ago It has become the most popular alternative method of low energy, cost-effective ventilation! 7 Year Warranty! Take action and change health of your family and home, people just like you and me. Review: It does what it is said to do. - Very good for stopping condensation and mould, does what it says it does very well. Review: Brilliant bit of kit for what is a modern problem - Got a older home ? Suffer from condensation ? Always having to have the windows open in winter ? GET ONE OF THESE ! Our house is now condensation free and more comfortable as we don’t have to open our windows all day in winter to ventilate it so our house is also warmer than it used to be ! Honestly the system just works, It’s quiet, dirty cheap to run ( about 1p per day is a good estimate ) and should be reliable ( 7 year guarantee ) After 3 years of living in our 1960’s home and suffering from bad condensation whenever the weather turns cold and trying everything I could to naturally reduce the amount of humidity in my home , I eventually bit the bullet and bought this model due to its excellent reputation, optional sensors and nuaire customer service was great when I rang them with additional questions before I bought the unit. A competent DIYer can easily install this. It took me a day to install this, trim all my doors ( you need at least a 10mm gap under all doors for it to work when doors are closed ) and to upgrade my loft hatch seal ( if you have a leaky loft hatch this system won’t work as well as it could as the fresh air will “ short circuit” back into the loft rather than putting your house under positive pressure ) I went with the LINK model and not the HEAT model, I wanted to be able to connect sensors and switches to the unit but had no intention of ever using the electric heating function of the HEAT model ( it’s much better and cheaper to turn your gas central heating up a tad, rather than rely on a little electric heater to take to the edge off the cooler air entering the house through the dri master )