Partshow Auto Parts - Satisfied Quality - Low Price - Amazing Value! As one of the world's largest automotive parts supplier, we are able to provide factory-direct prices to you that save you up to 60% off the retail price!All auto parts are tested before shipped to ensure you'll receive the highest quality product, and that it fits your vehicle.Fitment:This kit is perfect for any of 10, 12, 14, and 16 inch fans. Installation Guideline: 1. Mount the relay under the hood in a convenient location as to the fan as possible. Notice: Don't use the teflon tape or thread compoud on the thermostat or adaptor. For proper operation, the thermostat must ground through the threads to the engine and the engine must be ground. 2. Install thermostat into the head or intake manifold. Route the black wire to thermostat and cut to length. Crimp the red terminal onto the black wire and attach to thermostat. 3. Route and connect the red wire to the fan + terminal or power wire coming from the fan motor printed to electric fan. 4. Mount the circuit breaker provided in a convenient location as close as possible to whichever power source(battery or large terminal on the starter solenoid)you are using for the fan relay. 5. Cut to length and install using a small yellow ring terminal. With another small yellow ring terminal take the remaining red wire and connect the unused post on the circuit breaker to the battery source. This wire is printed to battery / constant hot. 6. Route the brown wire to the ignition switch or the fan switch whichever is more convenient. Note: For the two red wires,please connect the long red wire to the fan and the short red wire to the battery. Warranty: 18 months warranty Package Includes: 185-200 degrees Cooling fan thermostat relay switch kit ( 3/8" NPT )
Trustpilot
2 months ago
1 month ago
