Ecotex® Super Tack Screen Printing Pallet Adhesive - Water Based Glue, 1 Pt

Great product. I've used it for a few years and its the best way I've found for keeping shirt boards tacky for screen printing. Every dozen shirts or so, hit it with a damp cloth to remove built up lint, and it goes right back to sticky.

I had lots of issues with failed prints due to garments sticking to my screen. I tried several things to hold garments down (tape, weights, etc) but finally gave adhesives a try. I bought Super Tack since it doesn't require spraying, so I can just use this indoors in my house. What's also great about it that the 16 oz will probably last for a long, long time, so even though the $30 bucks for the smallest bottle seemed steep at first, it is actually great value for money . You just need a few drops so it will stick and one layer of adhesive will last for multiple prints. As others pointed out the adhesive can be very strong, so only apply a thin layer and if in doubt, use it once with some spare piece of cloth. In my first print I just went ahead with a thick layer and it was very hard to get off again. Luckily it worked out well in the end. My only concerns is that I don't know if I can just re-apply this forever and build up multiple layers - or if at some point I should try to wash it off somehow, the instructions were not really clear about that.

Are you wanting a product that will stick your items to the platform with out leaving a residue? This is what you are looking for. The first shirt we used this on, stuck like gorilla glue in hair. It took two of us to get it off perfectly, but that was our fault for using to much. I would highly recommend putting a hoodie on the plat for first, so that it takes some of the cotton off and gives a layer where you can still have your product stick, but pull off easily. The second shirt we used it on stuck to the platform and did not move, but came off like a hot knife going through butter. This is the perfect product!

I saw another DP crafter use this as a poured glue for DP canvases. IMO it works, but I will seal the finished DPs after they're completed. I do not feel this is quite tacky enough for the longer term, but I do not know this for certain. (It is possible more coats would work better.) My bottle arrived in excellent condition and is proving to have a great shelf life. I cannot judge this product for its intended use. I will buy this again for my purpose, until I find something with more tackiness.

Very strong tack. I use it to hold down canvas tote bags for screen printing multiple colors and it works great.

Great product, easy to use and a little goes a long way. I used spray tack the first time I screen printed, but the over-spray is so messy and undoubtedly bad for your health. I found this liquid super tack stays tacky for a long time. I used it for both paper and fabric, but printed on paper only when the tackiness had been lost a bit after printing on fabric. A credit card type plastic card works great for spreading evenly.

yeah, I needed this. im only a hobbyist. It last a long time for me though. Stop using spray, and get this. I use it over pallet tape btw.

Waste of time and money. Ordered one quart a few days ago. It came in completely rock solid and not usable. I ordered a replacement and same thing. Dried up completely solid glue in the bottle. Came sealed and everything. Ecotex is trash, how do both come completely solid. Don’t waste your money

good stuff