VIVO Freestanding Dual Monitor Stand with Sleek Glass Base and Adjustable Arms, Mounts 2 Screens up to 32 inch and 22 lbs Each, Black, STAND-V002FG

This monitor stand works great with a few adjustment issues. The stand was relatively easy to assemble, it took me about 15-20 minutes. The base seems to be very sturdy and I'm having no issues with the arms holding my 2 asus 22in monitors. I have the monitor arms adjusted like in the product picture with the arms bent back and the monitors side by side. I'm not having any stability or tipping issues with this layout. The monitors also appear to be level with one another and I haven't had any issues with them sagging forward. As for the cons, I only have 2. The instructions should have probably said to attach the vesa mounts to the monitor stand arms rather than the monitors themselves. The product arrived with the monitor stand arm brackets askewed. I could not turn them by hand and there was no obvious adjustment on the brackets themselves. I thought I had gotten a defective unit until I took the vesa mount off the monitor and attached it to the bracket. I was then able to turn the bracket to orient up and down to clip the monitor in place. The other con is that you cannot adjust the height upwards with the monitors attached. The monitors have too much weight. As soon as you loosen the bolt to adjust the height, the bracket almost immediately falls downwards. If you don't retighten the bolt fast enough, the bracket will continue to sag past your desired height adjustment. You really have to take the monitors off, adjust the height and then put them back on. Hopefully you only have to do this once, but if you need a stand that allows for easy height adjustment, this is not the one to get. Overall, I'm happy with my purchase and this has made working from home much more comfortable.

I love everything except one thing about this monitor stand: Height adjustment is MANUAL. At this price range that is totally fair and understandable, but just know it takes some effort and possible even help from another to adjust height. Getting your preferred height right the first time and is a bit of a guess and estimation. If you are off then you are going to be adjusting AFTER you have your flat panels attached and with their weight fighting you to raise them while tightening the adjustment bolt or trying to drop down lower than you want. One high positive is that despite the height adjustment trickiness this stand offers full adjustment as far as spreading the monitors and pivoting them left/right/up/down and also horizontal to vertical. Again, though, you may need help. Your height adjustment may want to drop on you if pulling on the panels too much. Also note the provided cable management clips are good but they don't hold enough cable "thickness" and there are not enough of them. Plan to add some nice looking velcro and spend some time getting everything to look neat instead of like a rat's nest of cables. Even with these caveats I would absolutely buy this again. It is has a nice, modern, expensive look and feel. Even if I wanted to spend more I would still choose this model because of the shape of the base. It is flat on top - which allows you to make use of that space. If it were curved you could not easily make use of that dead space. I place my docking station on top the base, and then my laptop on top of the docking station. That means I can also use the top of my closed laptop for my earpiece or phone. Last - how much monitor will this really hold? Mileage may vary, but for reference mine holds two 24" Dell flat panels, and one of them is slightly older and a bit heavier than today's models.

Purchased this to replace a different, less adjustable model and solve a problem. My old model made the monitors way to close to my face on shallow desk- basically they sat about 4 inches in front of the stand taking up lots of desk space. The adjustable arms on this new model allows me to pull them back to align with the back of the desk. That’s what I was looking for and this solved my problem perfectly- but there’s more! This was easy to put together, instructions clear. It’s nice looking and the glass base helps retain useable desk space since the whole surface is flat and level. It’s very sturdy, no wobbling no concerns about it tipping over - even with my heavy older monitors. AND lots of helpful adjustments in addition to the bending arm adjustment I was looking for. Excellent- totally worth the price.

I bought this stand to try to free desk space, better organize my two 27-inch Dell monitors, and raise them to a more ergonomic height for me. I’m over 6-feet tall and the Dell monitor stands were great, but didn’t raise the monitors high enough. I looked into getting monitor arms, but my grommet holes are too large and the price for sturdy monitor arms for two monitors was hundreds of dollars. When I saw this stand for under $40 and the positive reviews, I had to try it. It took me about 10 to 15 minutes to setup with a screwdriver and the parts provide red with the stand. To be safe, I recommend having a towel to lay your monitors face down when attaching the VESA plates The tough part was attaching the monitors to the stand one at a time without having the stand tip over. Once both monitors were attached , I had to adjust them so the stand was balanced and the monitors were even. Most of the adjustments require you to Allen wrenches included with the stand. Some of the settings were difficult to adjust, but worked well for the most part. Since finishing the setup, the settings have held and I haven’t had to make any adjustments. The stand is sturdy with a solid, attractive base that doesn’t shake when I type. I’m very happy with the setup and the price is great! I didn’t give 5 stars for three reasons. First, even though the stand holds the monitors a little higher than my original stands, they are still two inches short. Second, adjusting the orientation of the monitors requires delicate work make them perfectly even. Frequently, the monitor is just slightly askew, which is annoying, and it’s difficult to make the slight adjustments necessary to fix it. Third, the base is a bit large, taking up more space than I’d like. This may be necessary for balance and sturdiness, but still a problem for me. Still, I highly recommend this stand. It provides a cost-effective way to work with two monitors and frees up some desk space. It works quite well with my 27-inch monitors, although the larger your monitors, the fewer options you have for adjusting the monitor arms without them tipping over.

Was pretty skeptical about this monitor stand. However, once assembled with two 27" monitors, it exceeded my expectations. Takes a bit to get the monitors where you need them for your particular preference, but once set it's great. You do need to kind of set a balance otherwise the monitors want to fall forward. I recommend having someone help you set it up the first time.

Loving this. It works great for mounting 2, 27" 4k monitors, 1 a docking monitor. Base is so flat it's almost like it's not there very adjustable. 1 small issue my 16" laptop which I use open with them does cover the very bottom of the monitors if it's partly on their base to get it a little more air. So the stand could be half an inch taller. Overall very happy with it. Would recommend it.

Wow! I love this. It is very sturdy/stable, very well made/heavy. Can hold my 2 big monitors. Easy to assemble and very elegant looking. Adjustable. Everything is included and no need for extra tools. I regret how it took me so long to purchase this because I thought it won’t be able to hold my monitors and just tip.

Overall the monitor stand is made well and assembly is easy. I like the tempered glass base. It is kind of weird that the feet did not come with the rubber pads already applied. Its weakness is somewhat of a lack of precision in the manufacturing. The VESA brackets have slots which slide over brackets on the ends of the arms and these are made very sloppy for some reason. The width of the slot is much wider than the thickness of the metal bracket that slides into the slot. This creates an inappropriate amount of slack in how those two parts fit together. And that makes it feel cheap. It also makes adjusting the tilt of the screen where you want it harder than it needs to be. You have to compensate for the sloppy loose fit to keep the screen from being angled out at the top and in at the bottom. The pivot point for adjusting the screen tilt also requires an extreme amount of tightening with the allen wrench to keep the screen in place. There is not enough friction in the pivot joint to hold it secure unless you go nuts tightening the bolt. I was worried that the bolt would snap before I could cinch it down tight enough to keep the screen from drooping from a vertical position to being angle down toward the desk. I knocked off a star for each of those weaknesses. I used a hammer on the VESA bracket to make the slotted track smaller so it would fit tighter to take up the slack and I tightened the snot out of the pivot bolt and hoped that it would not snap the bolt off. It worked out and I am using it. It will serve my needs. Addressing both of these design weaknesses would not be difficult for the manufacturer and fixing both of those QC issues would easily earn it a 5-star rating.

Grymt bra, klarar av mina monitors (32 och 28) utan problem, enkel installation

Parfait. Rend extrêmement propre, modifiable en hauteur et position, tient parfaitement, produit solide. Je recommande à 100%.

Tras esperar una reducción en el precio debido a su alta calificación en Amazon, adquirí este soporte de monitor con brazo articulado y base de cristal templado. Estoy satisfecho con la compra, ya que su diseño articulado permite múltiples posiciones, ofreciendo una gran versatilidad para ajustar el monitor según mis necesidades. La calidad de los materiales es evidente; cada componente se siente robusto y duradero. La base de cristal templado no solo aporta una estética elegante, sino que también proporciona estabilidad gracias a su peso, manteniendo el monitor firme en su lugar. Además, este tipo de soportes ayudan a mejorar la ergonomía y organización del espacio de trabajo, permitiendo ajustar la altura y el ángulo del monitor para una posición óptima. Estéticamente, el soporte ha mejorado significativamente mi espacio de trabajo, dándole un aspecto más limpio y ordenado. Sin embargo, las instrucciones de montaje podrían ser más claras, ya que me llevaron más tiempo del esperado para ensamblarlo correctamente. A pesar de este pequeño inconveniente, el soporte cumple con creces su función y ha mejorado tanto la funcionalidad como la apariencia de mi escritorio.

The stand is generally stable and it fits my two 23.8-inch monitors, but it has one major problem: the height adjustment is not user-friendly at all. To change the monitor height, you have to loosen the screw with an Allen key, adjust the position manually, and then tighten it again. This is really inconvenient, especially if you care about ergonomics or need to fine-tune the monitor height after installation. For a dual monitor stand, I expected the height adjustment to be easier and faster. Once it is set up, it works, but adjusting it later is annoying and not practical. Because of this design flaw, I would not recommend it to anyone who wants a flexible or easily adjustable monitor setup.

The base is black glass and very nice and sturdy, and also looks good. Doesn't take up too much room on the desk. I ordered it for my boss, and he liked it so much, we ordered another two. Delivery was super fast and very good price as well, compared to other brand we purchased last year.