Spigen EZ Fit [2 Pack] Screen Protector for iPhone 15 Pro Max | 9H Hardness Tempered Glass, Easy Installation Kit, Case-Friendly, Crystal Clear, Touch Responsive, Oleophobic Coating

My previous screen protector for my iPhone 16 Pro Max cracked, so I needed a new one. I tried a couple of cheaper replacements, but they were plagued by bubbles. So I paid a little more for this Spigen protector. It comes with a fitting guide made of rigid plastic, glass cleaner, small microfibre cloth and a dust remover. I recommend watching the installation video (there’s a QR code and a website address to find this. Simple and easy to follow.) The result? Brilliant. Following the instructions, installation was easy, and the provided anti-bubble tool removed all the bubbles. So I now have great bubble-free visibility: I would not know there was a protector fitted. The touch screen responds as it did before the protector was fitted, and I am confident that the protector is durable. Oh, and there are two protectors included with all the extras. Great value for money.

I always buy these tempered glass. Easy to use and last long. It's also easy to apply on your phone. The cleaning pads it comes with also is very effective. The phone looks great after application and the quality of the screen is not affected by it.

I always find screen protectors annoying to apply, these are so much easier with the guide. Perfect application first try. Nice oleophobic coating makes its feel like the actual screen. I won’t bother with the cheap screen protectors again, these are definitely worth every penny.

Easy to install, good quality, just a little bit pricey

Perfect , really easy to fit and no bubble once you push them out with the tool. The first one i used did come with a chip defect but contacted spigen who sorted how a replacement, great service.

I usually get my screen protectors from the Apple Store, but recently Belkin’s system for requesting a replacement has become so clunky. I found myself requesting a replacement almost once a month because they always broke so easily. Spigen has never let me down. Their installation kit is so convenient and easy to use. I’m used to applying these the old school way so this was refreshing! So much easier! I use my iPhone without a case and this screen protector still hasn’t broken, no cracks or chips. Really durable. Obviously the touch screen hasn’t been affected in any way, not in touch or appearance. All in all, a solid purchase. Even if it does break, I’ve got another in the pack I can bang on nice and easy!

Despite taking a lot of care, I’ve had my share of disasters in the past trying to fit a screen protector perfectly without air bubbles or a tiny speck of dust so I “um’d and ah’d” about buying this. In fact I was very tempted go to a shop and get a glass screen protector fitted ‘professionally’ - but in the event I’m glad I bought this. It’s actually really easy to fit if you follow the detailed instructions and/or the YouTube video. I’ve only just put it on my lovely new iPhone 17 so I can’t yet comment on it’s toughness or robustness but it looks perfect - not a bubble or a speck of dust in sight! To look at the phone you wouldn’t know there was a screen protector on it. I’ve used Spigen cases several times in the past so I was confident that it would be a quality product. And don’t worry - in the unlikely event that you somehow manage to mess up with the first one or it does get chipped or cracked - you get a second screen protector in box.

Having dropped my iPhone 16 Pro onto my Nord keyboard this morning, I was relieved that the screen protector took the shock of hitting the projecting pitch bend stick and despite breaking quite badly, my iPhone screen was untouched and without a mark. I immediately needed to order a new protector and this Spigen Glas.tR EZ fit seemed a good choice. At £18 it is on the expensive side but you do get 2 protectors, easy application frames, cleaning wipes, dust removal stickers, a squeegee tool and microfibre cloth. Just as well as I ended up having to use both. Following the instructions carefully I thoroughly cleaned my phone screen with the wet wipe included, dried it with the rather small microfibre cloth and ensured there was no dust present. The packing foam around the included squeegee provided a handy spacer pad to accommodate the camera bump when resting the phone on a flat table with the cameras facing down. I immediately pealed off the backing paper of the screen protector inside the applicator frame and lowered it over the phone screen. After applying pressure in the necessary places as indicated and waiting 30 seconds, I lifted off the applicator and peeled off the remaining protector film. Despite my best efforts I ended up with a few small dust specks that create bubbles under the protector. The squeegee wouldn’t fix them so I managed to peel up the protector at the edge and use the dust removal sticker to clean the specks off. Unfortunately in doing that the protector came off and I spent quite some time trying to realign it manually by eye. This resulted in more dust and marks, so I ended up starting again with the second protector. Things went a bit better with the second one, but again dust bubbles! Eventually with patience and more luck I ended up with a perfect fit and no bubbles or trapped dust. However that meant I needed to use both protectors. The end result looks excellent although the protector is quite a bit smaller than the screen so leaves about a 1mm gap of exposed screen glass. That said once a case is fitted it looks ok and should provide full protection. It also ensures the protector isn’t overhanging the bevelled edges of the iPhone glass. It feels very smooth though and you wouldn’t know there was a protector without very close inspection of the edges. Image quality is the same as without the protector. In summary I’m a bit miffed having to use both protectors. Dust and bubbles are still a huge challenge when it comes to screen protectors. The applicator frame helps with alignment but won’t eliminate dust. That said £18 is a small price to pay compared to a replacement iPhone screen.

Spigen’s tempered glass fit for the iPhone 15 Pro is excellent, it doesn’t have any borders which will expand the bezels, and any tight phone casing will not lift the screen protector up. However, this means that there will still be a slight gap for dust to creep in. I have been using their tempered glass for a long while and each pack has 2 pieces. The easy application tray helps cut down the application time. I don’t usually have a problem applying screen protectors myself but this makes it super easy. Squeegee included in packaging helps smooth out all the bubbles. The dust sticker included is also generous. I just use the biggest piece to lift up all the dust particles before application. And best part? Each piece lasts me 2 years before the coating wears off and I need to replace them.

Melhor película que já comprei. Ajuste perfeito com ou sem capa. É fina e aparentemente resistente.

As capas e películas desta marca, são muito confiáveis, por ultimo usei uma capa para meu iphone 14 pro, original da apple, o telefone quebrou a traseira toda. Quando usei a capa da spigen em meu modelo anterior, nunca tive problema, com inumeras quedas, o telefone sempre esteve protegido

I’ve used these screen protectors for a few years now and keep coming back because of the straightforward application process. When applying screen protectors you will face two main challenges: 1) alignment & 2) dust & fibres 1) Alignment - Solved These screen protectors come mounted on a jig designed to align with the phone perfectly. The snug fit of the jig ensures that the protector is correctly aligned with the screen (and cutouts, if applicable) “the first time you do it!” 2) Dust & Fibres - partially solved There’s no easy solution to this but the kit includes the pieces that make this challenge easier. Here’s some additional comments on steps to follow to make this a success: 1) remove your phone cover - the jig is designed to fit snugly on the phone and anything else on it will get in the way 2) have a well lit area to work - looking for dust and fibres on the screen isn’t easy BUT good lighting will help 3) turn off fans etc. - small dust and fibre particles will easily blow around. This will reduce the chances of something settling on your screen at the last moment 4) use the provided materials - they are there for a reason 5) check orientation of the jig to the phone - make sure the indications on the jig for the top AND the top of your phone are aligned 6) wet wipe - go right to the edges, it’s better to clean a bit further than where the screen connects 7) carefully inspect for dust and use the tape to remove anything you see 8) lift the edge of the protective film so it can be easily removed BUT don’t remove it yet - do another check and tape removal of dust and fibre then remove the protective film and promptly mount 9) keep the sticky surface facing down - harder for the dust to go up! 10) read and follow the directions they provide (they are enough but the above tips should be useful too!) 11) admire your handy work. It is satisfying when it’s done right, so give yourself a pat on the back when you’ve done it well! If you’re going to use a screen protector (I have without fail for years) do it from the very beginning when your screen is still clean and scratch free. Screen protectors are not absolutely necessary on high end phones like the iPhone Pro models which have VERY hard and strong glass BUT glass can get scratched. Less high end models will scratch easier! If resale or a longer life to your phone is important, then I thoroughly recommend using them, and for a few years now, this protector and application method has been my “go-to “ for ease and quality.

İçinden iki tane çıktı, hiç dikkat etmemiştim ve çok sevindim. Videoyu izledikten sonra takmak da kolay. Her bir detay düşünülmüş paket içerisinde mevcut, çok memnun kaldım.