Bergmann Typhoon Digital Heavy-Duty Metal Tyre Inflator with Auto Cut-Off & LED Light (BCT-150D)

This one in your car Is a sure thing. As you know, you come to a standstill when you find one of the tyres flat. Well, with tubeless tyres in almost all cars, and with common puncture being nails, you know that, once you fill air in the tyre, you can drive it to the nearest repair shop instead of getting stranded. In that case, something like this, surely comes as a huge relief. I went to test the ability of the machine. My observations are following External Aspects 1. It’s about 1kg heavy and comes with multiple nozzles in a separate pouch incl. a spare fuse 2. It’s central body is metal 3. It’s air pipe and nozzle are sturdy and seems of good quality. 4. The 12V power socket is long though. The plastic power connector to the power socket could have been of a better quality. 5. The power cord length is good enough to cover all the 4 tyres of the car, just that you may have to move the inflators to each side for 2 tires on each side. Working Aspect 1. The connector is screw type so you lose some air while connecting and removing. So suggest you keep about 1 psi high limit to what you actually want to fill. Meaning if you want 31 psi, then put 32 as limit. When you take the nozzle out, you lose about 1 psi 2. The moment you connect the air connector, the digital display tells you the existing air measurement in the tyre. 3. You have a torch but it has low illumination. But does it’s job in dark 4. There is a switch to start the inflation. The moment you switch it on, it starts. It has a bit of motor noise but it’s not that bothering. 5. I inflated 2 tyres from 20 to 31 and each tyre took less than a minute to get to 31 from 20. 6. There is not much vibration per se and the bottom has rubber bushes. At this point, I am quite satisfied with the product. More because, when you don’t have digital inflators in fuel stations, then the manual ones are pretty inaccurate. In that manner; this one feels much better as it’s digital. Some of the points of concern 1. With the usage I mentioned above, the metal body got heated up. I assume when you inflate a fully flat tyre, then the body will get quite hot and my assumption is, you must cool done the machine for 5 min, before you start inflating another tyre. I would say, I was a bit concerned after inflating back to back 2 tyres from 20 to 31 2. Surprisingly the 12V nozzle that I connected to the car for power also got quite hot. So, my recommendation is, please remove this nozzle also after you inflate a fully flat tyre. 3. My feeling is, if you are inflating each car tyre by 8-10 psi (for eg. 20 psi to 30 psi) and doing all 4 tyres, you may still do it back to back without taking a break but keep checking the body and nozzle heat. But any fully flat tyre to inflate, break suggested above seems to be a must due to heat. 4. The instruction manual talks about continuous usage no more than 10 min and rest of 2 min. But with the heat that I experienced especially the 12V nozzle, I would recommend to give rest to this machine after 3-4 min of operation. Overall; speedy, does its job and good build quality.

Masterpiece of inflaters or i would say father of all the under budget ones solid build, i purchased this after a worn out of my previous cheaper plastic one. I tell u a story how this is a great. One day in rain, accidently my car filled with water from inside this item was under the co-driver seat where this filled with water like a stone in the glass filled with water, after that i thought it will no work but, after drying out this still works same as new. Inflates suvs type car tyre in a seconds.

I got 150D Model for just 1549, with 150 cashback. Just add to cart and move to save later, and check frequently for price change, they accidentally reduced to 1799 and immediately I got that deal. Am really impressed by the Quality, Weight of the product and performance also very good. The only thing that concern me and I feel drawback is, it's nozzle, it's design to rotate making a loss of air pressure when removing, but to tackle that we have to put extra PSI input, for example 33 PSI means we should place 34.5 to tackle the loss. It's very Ease of Use, plug N play. After usage, we can pack and place as the compactness is very good. Design is ergonomic. Simply superb. Without that nozzle thing, it's a 5 Star

Good Product Value for Money Performance is brilliant Auto disconnect pressure is good for safety Can suggest to buy

The machine itself was okay. The claim of attaining pressure of 0-30 psi in two minutes is far from being accurate. My piece took more than six minutes to reach 30 psi from 0 pressure. If your claim is guaranteed, then I am liable to be replaced with another piece.