10 Pairs/20 pcs xt60 Connector Male Female Bullet Connectors Plugs with 40pcs Cut Size Heat Shrink Tube for RC Lipo Battery

Great quality, didn't melt, even when soldering very large 10 gauge wire to it. One thing to be cautious of, which I didn't know until this point; make sure the other plug is inserted whilst soldering, I had an unfortunate incident that led to the female end got warped. Holds the opposing plug very well, so this could be an advantage to some. I use mine on my mini-quad and it personally gives me a bit of peace of mind knowing that my battery is snugly plugged in.

Utiliser poir les batteries de téléguidés

I purchased these connectors to link a 12v battery to an automotive amp, as well as connecting the amp to a 400w speaker.They have had no issues with the roughly 2-8A current passing through them in this application. The terminals are robust and easy to solder to, although they are large enough that the iron has to be at a slightly higher temperature to get a solid connection.My only issue with the product is that the included heat shrink tubing is slightly too large to easily fit into the slots in the connectors. This makes it fairly difficult to completely shield the connections as the tubes tend to separate with any force and leave some of the connection exposed. I've managed to seat some tubes properly but others came out of the connector only once heated and so could not be redone. I've included an image of connections where the tubes seated properly and one where they came apart.

Artrinck XT-60 connectors are well made and include the shrink tubes cut to sizes.

Quality was fine. Just writting to give some advice when soldering on the wires: Plug the connectors together when soldering. This will keep the pins from melting the housing and going out of position.