DaierTek Lighted Toggle Switch 12V Waterproof RGB LED Marine 16MM 12V 20A Heavy Duty Metal Toggle Rocker Switch Illuminated for Automotive Car Boat

Very nice look.I used blue and green at the same time to get an aqua look.Con: the wiring is very unintuitive. The lights use common power of the switch contacts themselves (not just the smaller LED wires). It took a while to get the idea of what was going on.Works fine with my 19v supply. I saw somewhere that 12v to 24v was okay.

I ordered 3 of theses LED lighted toggles and love the fit/finish/function of them. My only slight complaint thus far is the bezel markings for on and off. The on marking appears laser etched on both sides but I can slightly see an engraved OFF under the ON marking. All three toggles display this mistake. How you choose to wire the switch will determine which position is on or off depending on N.O. or N.C. , (Normally Open or Normally Closed), so no bezel markings would be better than ambiguous markings. For the price and for my purposes they are unbeatable. Love how the LED indicator ring changes colors and how easy it is to wire to light them as you wish. I'm using one of mine in a "sidewinder" bracket I fabbed to fit on my gearshift to function as a reverse lockout switch for my T-56 six speed. LED is green when locked out, red when not. Super fast shipping, great price very pleased. 👍

Which is worked great and looks great after I installed them but the directions that it came with are totally wrong I had to go with the photos on Amazon product page for the correct install guide... 2 completely different intructions... led portion of switch are triggered by ground not 12v power as shown by instructions that the package came with

I see that some folks are having a bit of trouble with the indicator LEDs. They are counterintuitive, however, the LEDs actually function very well in a verity of combinations.I am using the switches in a negative ground system and switching the ground. I use the blue light for the pilot and the green for active/on. Any combination is possible.

2 issues with the “upgraded” version.There is, at least on the product photo and on and off.. well on the 3 pack I received, the off stamp, has been stamped on with a bigger on (see attached photo) this make it look really bad..Second issue is the leds inside are not able to be run at the same time.. red always takes over any other color so I am unable to pwm to make other colors.. not that big of a deal for this particular application, but thought I would share to others that the colors can not be mixed in this manner.. perhaps and out of phase pwm would work.. regardless the rgb can’t be mixed.However the switch seems nice and seems like it might last.. a nice solid click upon switch and little to no play in the switching.-addition to review-The blue plastic broke off the metal housing making the switch, not a switch… seems like it was simply crimped on and the spring inside won the battle.. so, now I have a nice hole instead of a switch.. I would RMA, but honestly, it’s not worth the gas to drop off at ups for a refund..

The switch appears to be well made. I love the way they look, too.The biggest flaw, and there's no way around it, is that you need to use a separate relay to work the switch in conjunction with the LED light. There are many other feedbacks regarding this, so I will spare you the details.Sadly, I did not read those thoroughly, so I'm paying the price. Instead of returning, I've decided to use relays since I know how to work them. If you do not know what relays are and don't know how to use them, don't buy these unless you do not need the LED light function.

The media could not be loaded.  I've always wanted a switch that was lit when off so I can find it in the dark and these switches fit the bill very nicely. The chrome one's have a positive common on the LED's and the black one's have a negative common. Either can be made to work to fire a relay or even without. For the chrome ones you if you are willing to have the positive side of the accessory on all the time, you don't need a relay up to 20 amps. The black ones you can have the ground always on and switch the positive on/off like most setups. Also like the single connector on the black ones, that made installation a snap.

They look, feel, and work great! Very happy with them.

Semble de bonne qualité on verra

En sí, el interruptor se ve bien hecho, lo malo son las terminales de los cables incluidos que están muy chafas. el material es super delgado y se abren casi solitas.Los usé para los faros auxiliares de mi motocicleta.

Color and brightness very good. Only minor issue is there is no make contact on off position. I redesigned my circuit and it works fine. It allows the LEDs to light when power is switched off to alarm circuit so I have a warning light when off.

Not only are these good looking, but the ability to see them with a ring of a choice of 3 colors or no colors is unheard of. Waterproof too! The lighting is just right at night time where it is not overpowering as well.It takes a bit of study to wire them up as there is some unconventionality and I had to change plans to make them work, but the end result is excellent. The change is that the power must go to 2 places: the +ve goes to the switch (for the LED's) and also the +ve or main power goes directly to the end use and the return line comes to the switch and then grounded out from there in a common -ve. It is a bit backwards from norms where the power goes from the switch to the end use and then grounded there. Won't work this way, at least I couldn't figure it out. I had to use a relay in 2 cases to make it work, but that was a good thing regardless.Ya a bit tricky, but I still think overall, these are clearly 5 star. Gorgeous units. Well worth the money. Buy them!

Yellow goes to POSITIVE, that feeds the 3 colors. The three red, blue, green wires go to NEGATIVE. The print is so tiny I didn’t see the little negative tick behind the wires in the pic.