Longer Laser Engraver Air Assist kit for RAY5 10W/20W, Large Airflow, Adjustable Airflow of 10-30L/min, for CNC Cutting and Laser Engraving, Remove Smoke and Dust Protect Laser Lens Low Noise

Love it. It works perfect and works as expected. Wish it came with a little longer hose to connect everything as I’m working in a very funny space currently and can’t have the pump next to the laser. Works great BUT use it on a case my case basis. Cuts and light engraving have been phenomenal. Did a deeper pocket that removed a lot of material and the air assist blew soot all over the wood piece. Could be sanded but doing the same pocket again without assist yielded better results entirely. Not a deal breaker. Just pay attention to it and know when and when not to use it. Very happy with it.

Easy to install. Works great.

I see a clear improvement in the things I engrave with the air assist, it’s cleaner

The package arrived promptly and undamaged. The silocone o-ring between the air nozzle that threads into the laser head is a bit too large, and pops out of place; can't really secure w/o air leak. I had a piece of hobby store brass that fit over the nozzle well. The washer had no way to squish out. A thin washer would work too, diamond hone it until the nozzle input clocks to where you want it. Literally bought that tubing 50 years ago, what you gonna do. Still setting up laser (end stops - epic pita), so maybe 5 minutes on the pump, hope it lasts. It is not what the add shows, more like a copy. Fingers crossed. Does blow well and, feels heavy built. If you have a air pump port, I think, 3.5mm x 1.35mm 90 Degree Right Angle DC Barrel Male Plug Jack Connector is what you want, it does output 24vdc, not 5vdc, probably a control voltage only but only longer support know. Kind of odd they don't just tell you.

It is very well made and it comes with everything you need

Having this Air Assist was an Absolute Necessity for my Longer Laser!!! Why you ask? Well...it clears the cut-path of smoke which can cause beam scattering thus reducing power and precise detail. It reduces smoked edges on your cut material. It keeps your laser objective lens clear and getting hazed from the smoke which also reduces power thus requiring less maintenance in cleaning. So highly recommended to have and an absolute win all the way around!!! As a footnote, if you already have an air compressor you can take a trip to your neighborhood hardware store and get the barbed brass fitting to attach to the hose and then add on the quick connect to attach to your air compressor.

Use of air assist gives cleaner engraving so fine print is more legible and cuts do not have burn marks (assuming the piece isn't sitting flat on a table/board). This was very easy to install on a Longer Ray5 10W laser. Simply remove the existing metal "pyramid" that is shielding the laser and replace with the nozzle in this kit. I used a very small fish tank aerator that we had sitting around with great results for engraving. More air, however, is needed for cutting. To accomplish that, I added an adapter to hook it to my shop air compressor (turned down to about 15 psi). Standard 1/4" OD tubing with push to connect adapters fit perfectly.

Muy buen producto

Everything good

Si era esattamente il pezzo che mi serviva per il mio Incisore longer ray 5 10w

how stupid to send a 110volt item to a country that does not use that voltage . Aust is 240 volt

Tut was sie soll, ist sehr massiv und verbessert das Laser Ergebnis sehr