SUNLU Glow in The Dark PLA Filament, 1KG (2.2lbs), (Blue PLA, Glow Blue)

The color on this filament came out really nice, and the glow effect is actually better than I expected. Prints came out clean and consistent with no major issues. If you’re using a Bambu printer, I’d recommend running this on an external spool instead of through the AMS. It feeds better that way and helps avoid unnecessary wear. Overall, solid filament if you’re looking for something with a nice glow effect and good print quality.

I frequently use the Sunlu blue glow-in-the-dark PLA on my Bambu 3D printers, and the results are fantastic. The filament glows nicely for about one to three minutes after being charged under a light source. One thing to keep in mind is that you'll need to fine-tune your printer settings, as the filament can clog if the temperature isn't just right. Also, if you leave it unused for a few weeks, it can become brittle, so it's best to store it in a dry place and consider using a filament dryer before printing. Overall, it's a great filament with a beautiful glow!

Got this for grandsons 3d printer to make glow in the dark geckos. He loves this product! The quality is good.

Oh my gosh this glow in the dark filament is everything my life needed!! Blue is my favorite color. I have used every excuse I can to make everything i can in glow in the dark filament.

I live this stuff. It's not the brightest glow in the dark ever, but that's fine. Leave it under a black light for a few hours before it gets dark and voila! I printed a Tron Legacy identity disc with it. I also bought GITD Red to print a red disc. Have zero issues printing it, No stringing, no clogging. I've even used it to print Hueforge which Prince had 0.08 mm and have zero issues doing that.

There are three problems with this filament: (i) Took weeks to arrive. (ii) It does not have a strong "glow." (iii) Critically, it is so abrasive that it damaged the AMS feeder within the first 300 gr of use. I did not get to use have a spool that I get an error message that the filament gets stuck. Now I have to spend $50 and a few hours to replace the feeder funnel unit on the Bambu Lab P1S.

It glows, but not great…but otherwise it’s fine.

I wanted to give this filament 4 stars because the spool arrived messy and I fear a tangle in my future..but it printed perfectly and glows brilliantly. I glows way better than anything I've used before. I experienced no warping and it adhered to the bed with ease. The dark pictures are after I lit up the filament for 5 seconds with a standard led flashlight.

SUNLU macht hervorragende Filament, sie arbeiten bestens mit meinen Bambu Lab zusammen. Die meisten Filamente habe ich von SUNLU, geringe Fehler Quote. Leuchten könnte etwas stärker sein.

Le résultat est tres sympa, facile a imprimer

Sehr schön

Top zufrieden

Leider bin ich von diesem Filament sehr enttäuscht. Schon beim Auspacken habe ich festgestellt, dass die Vakuumverpackung nicht mehr richtig verschlossen war. Das Filament war extrem brüchig und ist beim Drucken ständig gerissen. Ein Drucken war damit praktisch unmöglich, da der Druck immer wieder abgebrochen ist. Offenbar hat das Filament zu viel Feuchtigkeit gezogen, was bei einem neuen Produkt einfach nicht passieren darf. Für mich war das leider ein kompletter Fehlkauf. Ich kann dieses Filament nicht weiterempfehlen.