BIZONOD mini drone with 6 axles and 4 safety guard-protected propellers provides the best stability and safety during indoor and outdoor flight. Super mini design is easy to carry and take pictures, moreover enjoy flight anywhere anytimeDescription:Quadcopter Size: 8.5X8.5X3CMGyro: 6-axisFrequency: 2.4GChannel:4CHBattery: 3.7V (250MAH) (included)Battery for transmiter:4 x AAA batteries(not included)Flight time: about 6~8 minutesCharging time: 50 ~ 60 minutesFlying distance: 100 metersBefore Flight:1) Kindly read the manual carefully and follow its instruction before you start to play.2) Ensure drone are fully charged, no defects on propellers; put batteries in transmitters.3) Paring: Turn on the controller, it flashes slowly. Push the left stick up and down, and the light of drone and transmitter stop flashing in the same channel, then paring is succeeded4) Calibration: Push both control sticks to the right bottom and hold them on, the LED lights flash and stop within seconds, calibration is done.Common Problem and The Solution:1. Flying errors may happen after flights, a CALIBRATION and some TRIM WORK will fix the problem2.Motors may heat up if being misused. Take a 5 min break between flights to cool them down3. Quadcopter can't lift up: Check the propeller to make sure it was installed correctly(diagonal propellers must be the same direction )3. Motor not spin: Check the motor to see if anything stuck the motor(hair, string, etc)Tips:1) Please turn off the drone when charging2) Switch the speed mode to low speed at the very beginning. Get use to the throttle stick slowly until you can understand how it works.3) If you can't tell the front of the drone, try to play under headless mode at first4) Try 3D Flip: Press and hold the right stick to any direction. Make sure the height is enough to perform a flip
Trustpilot
2 months ago
2 days ago
