SKIL 10 Amp Fixed Base Corded Router —RT1323-00

I bought this as a dedicated router for my SKIL RAS900 Router Table. It fits the table perfectly and all of the controls for speed and height adjustment are at the front if one puts the plate on the proper way. On my first install I had all of the controls at the back and realized that was not handy. I then saw that I could turn the router 180 degrees on the plate and as such all of the controls are at the front of the router table. It is very easy to adjust the height from huge adjustments to minor or micro ones. I am able to change any bit with the router installed so that is a plus. No need to remove the router or reach under the table as the bit can be installed or removed with the included wrench at the top of the router table. When I first turned on the router in the house with no bit attached I did a speed test and one could hear the huge difference from the 1 to the max 6 adjustment on the speed dial. For those interested in how much voltage this router uses, my tests showed it used 105 volts on the lowest speed and 535 volts on the highest speed. Now that was tested with no bit attached. Now with a bit cutting into wood creating a workload one would think that all of my voltage numbers would be a bit higher. It comes with an edge guide and all of those cheap ones are next to useless, unless one just wants to cut a dado straight down the board with no concern of an exact measurement in distance from the edge. The included 1/4 inch collet that plugs into the 1/2 inch collet is solid and a perfect fit for 1/4 inch shank bits. For the price this looks to be a really good router and will handle most tasks that one will ever do with a router table.

Exelente, llegó completo sin ningún daño, y a un excelente precio.

Powerfully and easy to use. Soft start

I've been woodworking and building for 60+ years. Lots of tools; lots of brands. SKIL was never at the top of my list.... ....it is now. They have seriously elevated their game. Loaded with features not found on much more expensive brands: soft start, RPM control (0-25,000), LED lighted clear base, vacuum port, safety light so you remember to unplug before changing bits., Heavy-duty, solid build, no undue vibration. Very ergonomic; feels balanced, not awkward. Would prefer the two-wrench method of changing bits, never cared for having to hold down a button, but that's just me. These features at this price is hard to believe. Great router. Just ordered another! Having said that, the seller page states 2HP, but the box states 1.75 HP. (10 amps = about 1.61 HP +/-) That's fine, no complaint there. Just sayin'. Plenty powerful enough for any project.

Nice little machine easy to use