Manissa Chrome Straight Towel Hanger/Towel Rail Bar Towel Rail Accessory

If like me your heated towel rail doesn't heat your bathroom as much as you would like, then smoothering the rail with towels is not going to help! I happen to have a towel rail that is 1800X600mm so have purchased two hangers for it. Now, unfortunately, the gaps between the tubes does not conform to the gaps given in the product description. Mine are 16mm spacing and the minimum in the description is 22mm. However, all is not lost, the fittings can work with 16mm: the locating discs do not fit so snuggly but apart from that, they fit fine. With a narrower spacing, the discs may not close together so well so you may need to buy longer 6mm socket screws/bolts. They should be of stainless steel and be 60mm long. In the photo, you will see that the mounting discs have moldings of two sizes. Make sure that before tightening, that they are all the right way round. Also, you can see the 50mm bolt supplied and the longer 60mm ones I purchased separately. Fitting the rail in situ is a little fiddly as you have to tighten the screws from behind: just persevere! Because my towel rail is 600mm wide and the towel hanger ~500mm, I wanted to increase the available space on the towel hanger to maximum. To do this, you will need to move the mounting brackets nearer the end of the hanging rod. You do this by removing the 6mm bolt and slackening the grub screw located under it using an appropriate allen or hex key. This is not supplied. The one I used is ~3mm across flats. Just slacken the screw, slide the fitting and retighten. Make sure the two brackets are square by standing the rail on a flat surface before finally tightening. As said, they are very well made of heavily chromed metal and look great. Being chromed instead of nickeled, the colour match to the rail is excellent. I give them 5* because they are well made, fit the description and although I wanted to use them outside of the specification they still worked well.

Nice rail but they don’t fit a standard steel towel rail I’ve had to purchase bolts, the ones that came with it are 50mm long and you will need 60mm+

Excellent product

This product is okay from a quality perspective but the bolts supplied are not long enough so I had to source longer bolts to fit a standard column radiator which made fitting much more difficult than it needed to be

It looked nice however the brackets didn't fit my radiator so had to return it.

Purchased two of these. Bathroom now much warmer whiel towels dry just as fast as they used to.

Great product, good quality. Easy to install and looks great.

Looks the part strong but unfortunately it wasn’t the right one for my radiator