YuanLey 48 Port Gigabit PoE Switch Unmanaged with 2 1000Mbps SFP Uplink, 50 Port 802.3af/at 800W High Power PoE+ Network Switch, Metal Rackmount Power Over Ethernet Switch

This is great if you router only has one or two rj45 outlets. It’s simply plug and play giving lots of outlets for your devices. At the moment it works very well, is quiet and manages four plugged in devices , hopefully the security cameras can be added and managed just as easily. It was very good value for money compared to other well known branded ones and performs just as well

Because my cameras are far away from my main switch I had to use intermediary switches in order to deliver data and power to each cameras. I am using this switch to power 1 POE camera and to transmit data to other POE switch. Until now it works very well, and all my cameras are transmitting the stream flawless. In my first week I monitored the connections to cameras checking the pings response time, and I was surprised how stable it was, with average ping response around 18ms from main switch to the cameras, without any high peaks. It is very good considering that some cameras data is passing via 3 switches. It is fan less, so no noise coming from the switch. In the idle it consume around 3 watts and when I have 1 camera attached it consume around 10 watts. The build construction looks very sturdy, solid metal. The metal build also help on heat dissipation. There is no power ON/OFF button, just plug in the power cord to power it on. I am not using it extended mode, so I cannot tell how the port isolation feature works. For my needs it is a very good device that worth 40 bucks price.

Bought this to run 5x external & 3x internal Hikvision POE cameras, including two with floodlights and one PTZ. We also have two Ubiquity Access Points on the first & second floors. I wanted the switch up on the third floor, but the NVR in my study on the ground floor. Install was a breeze; literally plug'n'play, and the fanless unit sits silently, doing it's thing. We ran Cat6 throughout the property when we renovated, connecting each room to a central cabinet in my study, plus shielded/weatherproof Cat6 to the locations we wanted external cameras. Our longest run between Camera & Switch is approximately 85m and from Switch back to Router/NVR is roughly 70m - there's been absolutely zero degradation in signal quality and all 9 cameras run at full resolution, the floodlight cameras light up exactly as they should and other than a minimal lag to access the PTZ camera, plus one or two Access Point reboots (which I put down to Virgin, rather than any fault in the POE switch), we've had very little to worry about. More than happy to recommend.

I like these Yuanley switches (when they work) This 5 port one had a dead port so I’ve got to order another and return this one. Hope the next one is ok. I also ordered an 8 port which tripped the house fuse when switches on. Turns out the 13amp Plug had the neutral and earth reversed. How bad is that? They refunded me £12 so I could buy a new one. I cut the plug off and fitted a Screwfix one. Sorted.

Been using the 8 port switch for over 3.5yrs, connected to 7 poe 4k cameras, working 24/7 in the garage attic where temps were anywhere from 0C to 35C and didn't have a single connecting issue, amazing value for money!

I have had this YuanLey 8-port PoE switch installed for about 3 weeks now. It is connected to four Hikvision 8mp (4k) IP cameras, a Zyxel wifi (PoE powered) access point and a Netgear 105PE (PoE powered) switch connected about 75m distant. Since installation this YuanLey switch has worked perfectly. The case is of all metal construction with wall mounting cut-outs. Mine is mounted vertically on a wall. It has an IEC socket (kettle lead) on back for mains power (so much better than an external wall wart). Importantly, there is no partitioning of network traffic to an uplink port (unlike some PoE switched do). All ports are equal. The one thing I don't like is that the port status lights (which show the current port speed) are below the RJ45 connector so in my configuration with the switch mounted vertically on a wall, the port lights are difficult to see unless the cables are lifted out of the way - see one of my pics. But this is a very minor annoyance. A very good product at a reasonable price. Pleased with my purchase and would definitely buy again!

Time will tell, but I bought this POE+ switch to power a raspberry pi cluster consisting of 6 Raspberry PI 4b and 2 Raspberry PI 5 (still waiting for the POE hats on these). The stability, temperature, and performance of the switch so far has been flawless. Fan isn't too noisey (I've heard much louded switch fans) and so far it's had no issues handling approximately 100w of Raspberry PIs. Will try to remember to update after more prolonged use.

This product has been installed and in use for 18 months. From the beginning it has worked very well. For the past week the unit has stopped working properly. The ports all light up however nothing is working. The listing has no confirmation of warranty length and no response from support.

Ich habe mehrere PoE Switches von YuanLey im Einsatz. Das Preis-/Leistungsverhältnis ist hervorragend. Besonders positiv hervorheben möchte ich den Service. Dieser funktioniert sehr schnell und zuverlässig. Alles in Allem kann ich die PoE Switches nur empfehlen. Hier stimmen Preis/Leistung/Service!

Compatible con protocolo IEEE 802.3af. Alimenta correctamente las cámaras Uniview.

Perfetto, compatto e potente, funziona alla perfezione alimentando sistemi poe come telecamere display etc.

Switch Plug & Play, fonctionnement satisfaisant. Bon rapport qualité prix. Installable directement dans une baie réseau 10 " grace aux supports fournis. Alimentation directe en 230 V, pas d'alimentation séparée. Faible élévation de température. Entrées 9 et 10 dédiées au raccordement d'une box internet par exemple, ce qui évite de "consommer" un des 8 ports RJ45 pour cette fonction.

Excellent value and truly plug-and-play. I plugged in my cameras and access points, and everything powered up and connected instantly—no setup needed. This switch delivers a solid 120W PoE budget across all 8 ports, perfect for powering multiple devices without worrying about power limitations. Gigabit speeds on all ports keep things running smooth, and the two SFP uplink ports add flexibility for future expansion or fiber connectivity. The build quality is outstanding—sturdy metal housing and completely fanless, so it runs silently and stays cool. I’ve had it running 24/7 without a hiccup, and it hasn’t dropped a single connection. For the price, functionality, and reliability, this switch is hard to beat. Highly recommended for home labs, small offices, or anyone setting up a clean, efficient PoE network.