Cold Water Storage Tank Insulation Jacket for Loft/Attic Tanks - BUNDLE 1 Large + 1 Small

Description

Mineral Fibre Wool Insulation Jacket for rectangular cold water tanksSizesLarge Size fits Large Tank up to 48"X24"X24" / 122cmX61cmX61m - up to 50 Gallon tankSmall Size fits Small Tank up to 18"X12"X12" / 45cmX30cmX30cm - up to 10 Gallon tankSize Flexibility: For smaller tanks, overlay to provide a double layer of insulationEasy to Fit1. Unroll jacket parts and shake lightly.2. Allow 1 hour for insulation to expand.3. Place short section panel over tank lid and cut insulation to suit vent pipes.4. Use self-adhesive insulated tape to seal any cut edges.5. Wrap long section of jacket around tank, starting at centre of one side. Trap ends of top panel in process. All sides of tank should be fully covered.6. Loosely tie jacket, using tapes provided and adjust so that ties are one third from top and one third from bottom of tank and equally spaced.7. Check fit of jacket to ensure even coverage.TipPanels insulate more effectively if they are not compressed so do not over-tighten straps.Meets requirements of UK Water Bye Law 30.