Bosch CC2430 Clic-Change 1/4 in. Self-Centering Drill Bit Assortment (3-Piece)

The product was as stated and after using I was very pleased with the results. Replaced multiple hinges in my home with no problems.

I JUST discovered these little gadgets!They are such a wonderful idea!When you have a number of holes to drill in the center of a metal hole (like hinges, caster wheel base etc...), these will drill you a hole (or at least. a pilot hole) 100% in the center every time with mindless ease!I remember futsing around trying to mark the center of the hole with a pencil and NEVER getting it right and getting frustrated! With this, you just put the right size in the drill and buzz! you're done!!! PErfect every time!

These are well made and work great...springs are even ground (which is proper and which you rarely see these days). Surprisingly still made in the US. Very minimal edge/burr cleanup to do and the drill bits are good quality. They'll break in with use but if you want to disassemble and buff the parts with fine scotchbrite, put a small drop of silicone oil in there, they'll be smoother right away. Spring tension is right where it should be.I've used these for several dozen holes and been very pleased with them. I started to do a lot of tiny #4 screws so I picked up the Snappy version for that one...it works fine but it's much stiffer and requires the special extra long drill bit replacements where these Bosch don't - they just use standard jobber length bits so they're simple to replace anywhere you can find them. I think these are better than the Snappy, maybe not quite as nice as the o.g. Vix but close.Looking at photos of broken bits and such I wonder if maybe some guys didn't adjust the bit depth correctly before use. The very tip of the drill bit should be resting inside the end of the nose cone but set in just a tiny amount, like 1/32". That way the cutting edge of the bit is inside the hole so there isn't any binding/jamming when the nose is depressed, but it's also back from the tip just enough to let you set firmly in the hinge hole before the bit contacts the surface. Not sure how that guy's spring got twisted up...really not sure how that could happen in use.

This set's blister package suggests an application to prepare holes for size 6, 7 and 8 fasteners.Drill bit sizes used in the set are 3/32, 7/64 and 1/8, smallest to largest. These sizes are blind stamped on each tool as well.Features a phosphate treatment to inhibit oxidation. Easily disassembled to replace the broken bits if needed. Drill bits are of the HSS variety and held in place by a set screw which can be removed with a 1/8 inch allen key. Drill bit lengths appear to be the commonly found jobber length bits that are found at your local tool center. Use these for a nicely centered pilot hole in preparation for hinge installation.I am grateful that this set claims to be made in the USA.There is an audible gritty sound that these make when used, although you won't likely hear this over the noise of your cordless driver.

Solid and accurate. Worth the extra cost.

These are excellent! I was about to buy an off-brand version, but I got this Bosch version of the self centering drill bits instead. We spent a lot on the cabinets and hinges, and I didn’t want to get a cheap version of these that doesn’t drill straight. These did an amazing job drilling for our Blum hinges! They are solid, the spring is just right, and they centered every time. Would definitely buy them again!

I do a bit of handyman work for some of my friends and neighbors, and these drill bits were just what I needed for putting new screws into door hinges. Good quality.

Another high quality product from Bosch