Dorman 604-029 Air Door Actuator

Lo compre porque un engrane del mecanismo del actuador que abre y cierra la compuerta del A/C para regular la temperatura en un Jeep patriota 2013,la cual se encuentra debajo del tablero lado chofer. El repuesto funciona excelente, cabe aclarar que trae una hoja con los ajustes que deben realizarse con un escáner con módulos de A/C. Producto recomendable.

Installed yesterday, so not sure about longevity... but it worked and corrected the problem on my 2015 JKU Jeep. I used this for the temperature blender door (found on the driver's side kind of behind the radio console area). Tough to get to, but I followed some youtube videos and AI advice, and it took me about an hour-and-a half to complete. You will need a 1/4 drive and some extensions, an 8mm and 10mm sockets and a stubby phillips head screwdriver for this particular actuator (there are three in my Jeep, and this may have been the easy one.

Fits well! Fast delivery

Bought this for a 2014 Dodge Journey. Easy to install with the right tools. Did the following to "calibrate" the actuator manually : 1) Connect the actuator to the power connector, and just let it hang loosely. Turn on the car. 2) Turn the heat all the way up on the climate control. This will trigger the actuator to go to "hot". 3) Manually figure out how the blend door arm needs to be do deliver hot air. 4) The climate control, the actuator and the air door are now set to "hot". Install the actuator to its place and tighten the 2 screws. 5) Play with the heat and verify the air is hotter or cooler. Turn the heat all the way down and verify the air is cool.

Quality product