HEMEINY 2 Packs 33XL Waste Ink Tank Sponge Pad Compatible with Expression Pre...

Epson XP ink pad replacement. Product came in a two pack. Opened, and slid it out. Also comes with a pair of disposable gloves to keep things clean. Some videos show simply cleaning the old pads. I tried this. Major fail. They somewhat cleaned up, but shrunk down in size. Messy and not worth it. Removed new pad pack and inserted into the empty and CLEANED out housing. Good YouTube videos showing how to access it. The new pad packs are notched slightly different. Most likely to accommodate different model printers. Looking into the holder, you can see where the ridged side goes. Only fits one way. NOTE: you must reset your Waste Pad Full message. Can only be done via a softward download. I used one that offered a free trial to see how it works...perfectly! However, only restores internal counter to 80% full. Worth the trial just to see if it works. Rebooted printer, message gone.

This is just as described and doesn't include the electronic key and software to reset the printer. That is available from other online sources.

They come 2 to an order and are inexpensive. I followed another reviewers advice and went to YouTube for instructions on how to replace the old one. I didn't purchase the re-set code until my computer person gave the okay for a particular site. My Epson printer is working perfectly again. Epson referred me to their tech or suggested I buy a new printer. Surprise, surprise. 😄

It is a lot easier to install these sponge pads in the waste ink tank that to get to the tank (many screws) and then reset the Epson counter. I watched many a YouTube instructional and still was not sure. You have to purchase the reset code online. Getting to the tank is just following instructions but resetting the waste ink counter might as well be "Brain Surgery". The pads were well packed and included thin rubber gloves as it can also be a very messy procedure if you aren't diligent with cleaning out the tank and properly disposing of the old saturated pads you can have a big mess.

Watched a YouTube video and showed me which pads I needed for my Epson printer. Pretty simple to change out. 👍🏽

It was not to difficult to change these out and it was a whole lot cheaper than replacing the printer.

I ordered the waste ink pads for my printer. My printer was listed among the others for being able to fit the waste ink pads. They fit easily into the ink waste container and so far are doing a good job.

Pro's: 1) The printer sponges came fast. Thanks Amazon 2) I did not open them but they came in a see thru package and they look like quality product. Con's: 1) Epson XP-820 and many other Epson printers will SHUT DOWN after many head cleanings. It's because these sponges get full of ink. Every time my printer comes on it goes through a short head cleaning. Furthermore, over the years I've had to clean the print heads (which spew ink into the sponges) many times. Epson makes sure of this! 2) There are many video's on how to open the printer to replace the sponges. Not a big deal. However, what IS A BIG DEAL is that there is a COUNTER within Epson's software which MUST BE RESET. Just replacing the sponges without resetting the counter will do no good. The printer WILL SHUT DOWN. You must download the software, install it, and reset the counter. Then you're good to go. 3) I purchased from this Seller because his price was good and he said to contact him after the sale and he would point me to where I could download the software. Sounds good so I took the bite.. hook, line and sinker! 4) The Seller did send me the link to the software via Amazon. I went to the website and it's on Baidu which is a huge and famous Chinese website. However the link was in 100% Chinese and of course I can't read that. I used intuition to try to download the software but even then I couldn't do it. That made the purchase of the sponges USELESS! 5) I wrote (via Amazon) to the Seller telling him of my problem. We had several back and forth conversations and I told him I'm a Caucasian American and there is no way I can read or understand Chinese and it is impossible to download the software. 6) Long story short, I initiated a Return via Amazon then a few hours later the Seller wrote and stated he was giving me a refund. The refund showed up but I'm still returning his product as I'm honest. 7) The Seller encouraged me to visit China and then shocked me when he hoped I'm not prejudice! Wow! I couldn't believe it. Playing the race card! I wrote him back very clearly and told him: "I've been to China several times. I started going to Hong Kong in 1964 and Taiwan. When China opened up I started going to Mainland China in 1990's and through the 2000's. I've been to Shanghai, Beijing, Guangzhou, and Shenzhen and smaller cities. My ex-wife (who passed away) was 1/2 Chinese. My children have Chinese blood! So don't tell me I'm prejudice." In conclusion, there's a race war going on right now in the Middle East. For this Seller to slap me in the face with this label because his product DEPENDS ON SOFTWARE to make it work and the website was in another country and in another language that I (logically) don't understand... well, it's unconscionable! Please be aware of these problems should you order this product!

alles Passt, Preise und Lieferung! Perfekt!

Very messy job to change the ink soaked pad but not it all worked well

Fait le job .merci au vendeur

< Austausch erfolgte problemlos < Ein Epson Drucker WIC (Waste Ink Counter) Reset wird mit dem WIC Reset Utility durchgeführt, um den vollen Tintenauffangbehälter-Zähler zurückzusetzen, was den Drucker nach Erreichen des Limits wieder nutzbar macht; dazu lädt man die Software herunter, kauft einen benötigten Reset-Key online (oft über Anbieter wie inkchip.net) < WIC Reset ist ein Dienstprogramm (WIC Reset Utility), um bei Epson- und Canon-Tintenstrahldruckern den Zähler für die Tintenauffangbehälter (Waste Ink Counters) zurückzusetzen

Van perfectas las instalé y encajan perfectamente.