







Desertcart purchases this item on your behalf and handles shipping, customs, and support to Japan.
🚗 Elevate your Lexus GX touchscreen with flawless protection and crystal clarity—because your ride deserves the best.
The WEIPIN Glossy Tempered Glass Screen Protector is engineered exclusively for the 14-inch touchscreen of 2024-2026 Lexus GX models. Featuring a precise 1:1 fit, 9H hardness tempered glass, and a cutting-edge anti-glare coating, it delivers superior scratch resistance, fingerprint repellence, and night-time clarity. Designed for luxury and durability, it ensures your vehicle’s touchscreen remains pristine and responsive, backed by a 365-day warranty.






| ASIN | B0DPM52NSK |
| Best Sellers Rank | #562 in GPS Screen Protector Foils |
| Brand | WEIPIN |
| Brand Name | WEIPIN |
| Clarity | 97 |
| Color | Transparent |
| Compatible Devices | Navigation System |
| Compatible Phone Models | For 2024 2025 2026 Lexus GX |
| Customer Reviews | 4.4 out of 5 stars 422 Reviews |
| Finish Type | Glossy |
| Included Components | screen protector |
| Item Dimensions L x W | 9.5"L x 4.4"W |
| Item Hardness | 9H |
| Manufacturer | WEIPIN |
| Material | Tempered Glass |
| Model Number | WEIPIN20241204 |
| Number of Items | 1 |
| Part Number | WEIPIN20241204 |
| Product Dimensions | 9.5"L x 4.4"W |
| Screen Size | 14 inches |
| Screen Surface Description | Matte |
| Special Features | Full Coverage |
| Unit Count | 1 Count |
| Warranty Description | 365 Days |
O**R
Perfect protection and crystal clear!
I bought these for my wife’s new car and they are exactly what we needed. She has long nails and was worried about scratching the screens, but these tempered glass protectors offer great peace of mind. The fit is spot on for both the dashboard and the touchscreen. They were very easy to install without any bubbles, and the "glossy" finish looks just like the original glass. The touch sensitivity is still perfect, and the screens look sharp and clean. Great quality and a must-have to keep the interior looking brand new!
K**.
Use gloves, prep the surface well, and leave about a millimeter from The edge if possible
It took three times to get it right but it works great once you get it. I follow the instructions to the letter, and it worked well. The first two times I tried to get it on there were sections that would not sink in and fully attached. Always near the edges. So I took it off very carefully and slowly because if you go fast it will probably break. Just put a little pull up pressure on it and it comes right off it just takes a minute. Then instead of butting it all the way against the edge of the screen, I made sure there was at least about a millimeter from the edge. The first time I tried this I didn't get it just right so I had to take it off again. Third time was a charm. It set itself completely with no bubbles and it looks good and it definitely does a good job reducing fingerprints so I'm very pleased. And this is to my surprise because some of the reviews made me think there was very little chance of success. Also, I use nitro gloves and I also cleaned the screen with a lint-free cloth and premium glass cleaner ammonia-free stuff prior to starting their installation instructions. The lint-free terry cloth of course left lint and streaks so I was a little worried but the wipe that they provided followed by the non-woven cloth worked perfectly. Use gloves and prepare the surface and make sure there's not lint flying around. Some of the negative reviews have bubbles and it's clear that some of the negative reviews have bubbles and it's clear that that's from lint or some kind of screen imperfection. The screen doesn't line up 100% accurately in 100% of the edges and cutouts, but there's barely a noticeable difference in the areas where it's not absolutely perfect. 90% of it is absolutely perfect in my particular case anyway. I think a lot of it comes down to user installation and alignment technique. Here's to hoping this last long and does the fingerprint trick. Did not notice any glare reduction. Just FYI
F**N
great screen protector
very good product with a great price. easy to install. great adhesion with complete screen coverage. excellent fit. very durable.
W**D
Fits 2026 Ranger
Fit perfectly on my 2026 Ranger Lariat. Easy to install. Clear instructions included. Does not hinder response of the touch screen. Good product at a reasonable price.
G**L
Good but not perfect
So, this protector is pretty good, but not perfect. (Didn't I already say that?) Here's my take on it, good and not so great. Positives: 1. VERY EASY application. I was REALLY impressed with how easy this went on! I've applied PPF using soap & water & a squeegee, which turned out nice, I've installed the Android & IOS protective film (some easier than others), but this BY FAR was the quickest and easiest to install. 2. No glare. I like that there's no reflection or glare (although, there wasn't much before). 3. The fit. Some reviews claim the "holes" or areas around the knobs, the right one in particular, were not correctly measured and cut. I can attest to that not being an issue for my 2024 Lexus RX350h Premium with the 14" screen. 4. Fingerprints and smudges are REDUCED. They're not COMPLETELY gone, but they're reduced....which takes me to the negatives. Negatives: 1. The fingerprints are not COMPLETELY gone. When I touch the screen to change a station or close a dialog, there are slight fingerprints. This could be me because maybe my fingers are more "oily." 2. There is an overall "dullness" to the screen now. Remember when I said there was no glare in the Positives section? Well, it's almost like someone sprayed the screen with a matt finish. I honestly just wish the protector was a neutral CLEAR - no shine, no matt finish, just....CLEAR. A couple of installation tips for you. I "dry-fit" the protector before peeling the backing off. So, instead of lowering the protector from the top DOWN towards the knobs, I moved it INWARD from my chest to the screen. That way, the cut-outs fit PERFECTLY over all 3 knobs. I also used a microfiber cloth to cover my finger and drew a "cross" or "plus-sign" from the top down and from the left to the right to make sure it stuck. It did. Finally, I had ONE bubble in the center of the protector about the size of a quarter. I used a microfiber cloth and firmly pushed the bubble from the top of the bubble and "out" to the bottom of the screen. (I moved it to the closest "escape" path. Had the bubble been towards the top, I would have gone UNDER the bubble with the cloth and pushed it UP and OUT through the top).
C**R
Works great in the sun, however it mutes the screen and low light conditions.
I just installed this. I probably should have read other reviews first regarding how to line it up. Start from the top left. The angles aren’t quite perfect in the right side. Having said that, it is fine and looks great. I didn’t realize when I read the reviews that they weren’t all for a matte finish. The good is that it really limited fingerprints and does help a bit with glare. For my personal taste, the screen looks almost too muted. I have a tricky spot that I need to pull into and if feel like it makes it a bit more difficult to see especially when dark out. I kept thinking I needed to peel off more plastic on the front. Then I realized there isn’t any..I think if I really needed this for glare with a lot of bright driving conditions it would work really well. I mostly wanted it for protection and I’m struggling with the reduced visibility in a low light. It’s not awful. It’s just not quite as crisp. On the bright side I think I figured out all the tricks for installation lol and I just ordered the glossy version of it (the price is great so this didn’t hurt as much as it could have) I will say during install when I cleaned the screen, I was a bit freaked out about how much dust seemed to be floating around in my car lol I had a spotlight on it so I could make sure the edge is lined up. But once this one was on, it looked fantastic. It didn’t leave bubbles where some of the pieces of flying dust had been. I was really surprised about that. There were maybe one or two bubbles from spots it didn’t adhere to initially, but they came out super easy just by putting some pressure with the palm of my hand and dragging it across the screen. It also held up really well when I lifted it up, (probably four or five times) in different spots to see if I could peel anything off the front of it and it laid back down with absolutely no problem. My biggest issue is the muted picture. Just be aware if you are using this to pull into a very tight garage in the dark it might obscure your vision too much. So get the glossy one instead.
S**S
Bubbbles, and no way to contact seller
Terrible time getting bubbles out. Followed the sellers instructions to the letter, no luck. I used to be a tinted glass installer for many years and this is a thin hard plastic material. Cannot work the bubbles out as it is not a film so squeegee ops do not work. Seller claims, Free replacement, lifetime service on the Amazon web portal. That is not true only option is to return item to Amazon. Seller cannot be contacted directly.
B**B
Great value, protection, and peace of mind.
Installed on 2025 Camry XSE, Perfect fit, 15-minute install. Comes with everything you need to, including instructions, wet / dry wipes and alignment guide. If you've ever installed a screen protector on phone, tablet, or other device, you'll know the routine. Have had it installed for 4 months now and am very pleased. Excellent clarity and don't have to worry about scratching the OE screen. If you ever decide to remove / replace it, simply lift a corner up and gently remove.
A**Y
Did not fit my '25 Ford Ranger HMI screen.
There should be 0 star option. It is too small for my '25 Ford Ranger. I opened the package and the cleaning pack, that is why I cannot return it anymore. Totally waste of money. If it fits, it will be 5 stars. It comes with surface cleaner and wipes, dust stickers and the quality of the protector looks very good. But all going to trash now.
T**.
👌
Very good quality
C**O
Excelente
Quedó perfecto, están hechos justamente a medida, si los pones bien, no se verá que tienen mica
G**A
Extra layer of protection for your screen.
Overall, great quality screen protector. Fixs with 2023 Lexus RX500h. You might need to peel it off a few times to adjust the angle. (Otherwise, there will be bubbles underneath). Make sure the car is not dusty during installation.
Trustpilot
1 month ago
3 weeks ago