YESWELDER 205A Tig Welder with Pulse Large LED Display, STICK/DC TIG/PULSE TIG 3 In 1, 110&220V Dual Voltage TIG Welding Machine TIG-205P

This welder is a solid choice for beginners looking to practice and learn the ropes. While the ground, stinger, and power cord are a bit short, it gets the job done effectively. I've successfully run it on both a 240 on a 30 amp breaker and 120 on a 20 amp breaker, with decent results. The TIG function works well and serves as a good starter kit.To enhance your welding experience, consider investing in extra consumables like gas screens and wide cups for freehand welding. It's also worth getting a pedal for added control. Despite its minor shortcomings, this welder offers a good platform for practice and skill development, especially considering the great deal I snagged it for at $260. Highly recommend for those starting out in welding!

I have been a certified professional welder for over 20 years and own countless welders. This little thing performs amazing, considering the price. I was very sceptical when I bought it but figured what the heck for 200 bucks I cant go wrong if it works. When I unboxed it the cables and stuff are slightly cheap looking but hey, you get what you pay for. I ran a bunch of sample weld set ups starting with stick. I plugged the welder in to my Honda EU 3500 portable generator in the 30A plug. I ran beads on flat plate starting from 30 amps all the way to 100 amps on the welder with no problem! That was the most I could get out of it on the generator, but it is still amazing, considering it runs off of a generator. Then I plugged it into my 220 power off of my miller and ran beads consistently for about an hour perfectly at full power with no problems at all. It is amazing as the unit is so light compared to my other units. I plan to buy another one for 200 bucks and use it when I work in remote locations that do not require heavy ship welds. This thing is awesome; you can't go wrong with the price. I recommend buying it and getting insurance on it. You will be welding in no time, and if anything happens, you can return or replace it. You can buy 12 of these instead of 1 comparable miller. Nuff said

The YESWELDER TIG-205P is a fantastic 3-in-1 welding machine! It handles STICK, DC TIG, and PULSE TIG flawlessly, with smooth performance at both 110V and 220V. The large LED display is user-friendly, and the pulse function delivers precise, clean welds. The 205Amp power is perfect for various projects, while the dual voltage adds great flexibility. Durable, efficient, and packed with features—this welder is a steal for its price. Highly recommended for DIYers and professionals alike!

I really wanted to love the TIG-205P Pro. For the price, it offers impressive features, clean arc starts, and easy controls — everything I was looking for in a light TIG welder.Unfortunately, after only 2 hours of use, the stock ground clamp cable melted and completely severed at the connection point. This wasn’t due to misuse — I was running well within the machine’s capabilities. Upon inspection, the included cable is only 16mm² (roughly #5 AWG), which seems undersized for a machine rated to output 200+ amps. Combine that with what appears to be a poor or loose internal connection at the clamp, and the result is overheating, melted insulation, and a failed cable.This is more than an inconvenience — it’s a serious safety concern. I’ve reached out to Yeswelder directly and am hopeful they’ll make it right by sending a properly rated ground cable and addressing this flaw in future builds.If the grounding issue is resolved, this would be a solid 5-star machine. But until then, I strongly recommend replacing the ground cable and clamp immediately if you buy this unit.Update: After posting my initial review, Yeswelder customer service reached out promptly and offered to send a replacement ground clamp, no hassle. They explained that the failure was likely caused by poor contact between the clamp and the workpiece, which can cause overheating due to high current flow — a fair point.I still believe the included ground cable may be undersized for a machine capable of over 200 amps and will update again if that proves to be true.That said, customer service was excellent, and I appreciate their support!

I wanted to learn how to start tig welding for sheet metal work on my restoration project. For the price you cant beat it, and so far everything seems to work great. Still trying to get the hang of it but its a perfect learner machine.

The media could not be loaded. This welder is a welder you buy to sit in the corner and use once in a while, that "will work" in a pinch. This welder is great, up until you weld with it using the YesWelder Pedal that is made for this welder.The welder is great for mid range and higher ranger amperage. Once you get down to the 50A and under, it becomes a pile of junk! I bought the pedal made for this welder (according you YesWelder) and the machine/pedal completey disengages at 30A. So if you are welding on thin material at, lets say for example 50A and you want to trail your arc out to avoid divents and/or pinholes, you only have 20A to work with (50A but cots off at 30A, which leaves 20A play with a pedal).This welder is great for a utility or in a pinch, but for welding anything that is thin at low amperage, this welder is garbage. Stay away if you will be welding on any sheetmetal, thin edges when using pulse, anything small and thin, STAY AWAY AND GET A NAME BRAND WELDER!!!I heard great things about YesWelder Customer Service, but I have reached out to them on their website and they have completely gone dark, and just ignoring the issue completely.Have bought many YesWelder products up to this point, and I will be staying away and buying name brand from here on out. Spend the money on higher quality na e brands, you will NEVER be disappointed!