









Desertcart purchases this item on your behalf and handles shipping, customs, and support to Japan.
๐ Tow Boldly, Tow Confidently โ Your Broncoโs Best Backup!
The Nilight 2" Rear Bumper Trailer Hitch Receiver Kit is a precision-engineered, direct-fit accessory for 2021-2026 Ford Bronco 2 and 4 door models (excluding Bronco Sport). Crafted from heavy-duty alloy steel with a rust-resistant powder coat, it supports up to 3500 lbs towing capacity. This all-in-one kit includes mounting hardware, a hitch cover, and dual power cord brackets, delivering durable, hassle-free installation and reliable performance backed by a 2-year warranty.

















| ASIN | B0C242WYTM |
| Automotive Fit Type | Vehicle Specific Fit |
| Best Sellers Rank | #37,841 in Automotive ( See Top 100 in Automotive ) #77 in Towing Hitch Receivers |
| Brand | Nilight |
| Brand Name | Nilight |
| Compatible with Vehicle Type | Trailer |
| Customer Reviews | 4.6 out of 5 stars 237 Reviews |
| Finish Type | Powder Coated |
| Included Components | 1 x Rear Hitch Receiver, 1 x Set of Mounting Hardware, 1 x Hitch Cover |
| Item Type Name | Nilight 2 Inch Rear Trailer Hitch Receiver Kit for 2021 2022 2023 2024 2025 2026 Ford Bronco 2 Door 4 Door (Exclude Bronco Sport) Rear Bumper Tow Hook Black Hitch Cover Kit, 2 Years Warranty |
| Manufacturer | Nilight |
| Manufacturer Part Number | 91081B |
| Manufacturer Warranty Description | 2 Years Warranty |
| Material | Alloy Steel |
| Material Type | Alloy Steel |
| Maximum Towing Capacity | 3500 pounds |
| Model Number | 91081B |
| Number of Items | 1 |
| Pull Force | 3500 pounds |
| UPC | 840323903523 |
| Vehicle Service Type | Trailer |
M**L
First one saved my vehicle from damage so I bought a second one.
Easy to install, Looks good. Saved my Bronco from any damage to the vehicle when someone rear ended me. The receiver took the damage the frame was fine. I just bought a new one and installed it in about an hour from start to finish (second time was a lot quicker.) For less than a $100 this is a must have. The hardware was all there on both.
P**D
Easy install
Do not let removing the bumper scare you. It was 6 bolts and super light to remove. It says you don't need to remove it but it did make it easier to install. From start to finish I would say it took a half hour. The bulk of that time was trying to get the bumper sensor connector back together. It just would not click in. There was some sand in there and after a few curses and compressed air it went together.
J**D
Easy install
Much cheaper than a factory hitch , about same capacity so works great
K**S
Awesome product
Very good quality product, fit like factory. Really liked the brackets that came with it.
A**R
2024 ford bronco
Super easy to install. But needs better description the bumper definitely has to come off with howling the bolts are.
A**R
Easy install
Easy installation. I had to loosen bumper to remove a plate holding the 7 prong and then was able to follow the instructions with the hitch.
J**B
Not bad, but not great either
This receiver works. It fits the frame of the 6th gen bronco just fine, and Iโm not worried about it breaking. For the price, I would have liked it to feel a little better, especially because my 4-pin didnโt fit in the given hole. A zip tie fixed that, so no big deal. The instructions make a major error that makes me worry about the quality of this product. To install this, you MUST take the bumper off. DO NOT put the bolts in backwards. The head of the bolt should be facing the trailer, and the nut should be facing the engine. Bolts are designed to take the load on the shoulder, or the area between the head and the bolt itself. Using the nut to support 2,000 pounds could be very dangerous. Other than that remark on safety, this is as good as adequate gets. If you want to be safe, install it right, and I have no doubt it will last 5-10 years before you have to think about it.
A**R
It works
I have a 2024 Ford Bronco Outer Banks. It came factory pre-wired for the trailer hookup along with a bracket. The bracket had to be removed before I could install the trailer hitch. The bolts on the OEM bracket were very long and required either the removal of the rear bumper or removing the bottom bolts, loosening the two bolts at the top that are very hard to get to and swinging the bumper out enough to get the bolts out. Once the OEM bracket was removed the new trailer hitch went it with no issues. I chose to loosen the upper bolts as it seemed it would be very difficult to get them threaded back in.
C**W
High quality
Installed on 2022 Bronco Badlands Sasquatch very easy to install ended up taking off bumper to install hitch makes it easier. The look of it is great and as described on amazon. Instructions easy to follow. 30 min install. You do need a second person if taking off the bumper
B**N
Looks Factory, easy install, remove bumper.
This is a good product welds are smoth and precise. The look is factory and took me about 30 minutes to install. We did upgrade the bolts as I was not comfortable with the bolt up supplied. 5$ for added piece of mind. This is great for utility trailer or bike rack, by no means are these bronco designed for towing large loads, despite having the V6. It's the frame,brakes etc that needs consideration also.
G**N
Fits perfect
Easy to install, fits perfect.
R**S
Very good but
I did run into an issue with the hitch I was sent. Unfortunately I installed and then found out there was a bead of weld so I couldn't put the tow bar in. I contacted the seller and sent pics. Very quick response and they sent me out a new one. So I would suggest you try your tow bar before installing hitch. I'm happy with the purchase and seller stepped up. Very nice.
S**M
put washer both side of hitch.
solid build, good coating. comes everything needed to bolt on. It would be better if simply just say how much torque need for all the bolt.
Trustpilot
1 day ago
3 days ago