Bambu 3D Printer PEO PEI Build Plate 257x257mm for Bambulabs X1/P1/P2/X2/A1

Plate works as intended. Quality is great, just don't forget to buy glue otherwise you're going to regret it later! Fit perfect on my P2S Combo. Highly recommend!

This works great (note it doesn’t have the code on it so the printer can read it so you either have to turn that off on the printer or just click ignore when you send a print to the printer. This is a nice smooth plate - I by far prefer the bottom of my prints to be smooth rather than textured with the original plate provided with my P2S. Great price and fits perfectly. Have printed probably 100 things so far on this plate and the look it creates is great and every single print has stuck great and released when flexed.

Both sides offer great adhesion without the need to add any modifiers. I've printed a variety of materials on these, and think they're definitely a good deal. They look cool, they leave a nice finish on your parts, and they have a good thickness that stands up to repeated pulling off from magnetic beds, so I'd say the durability factor is there. The diamond pattern on the one side adds a cool little flair to your prints. I'd say these offer some pretty good value for money, and allow you a wider range of functionality with your 3D prints.

I was so afraid to try a non-bambu branded build plate on my bambu but so glad I did!! This build plate is a game changer for me and it worked really well! The prints come out beautiful with the pattern and I was so impressed I bought 2 more for my other bambu's. The joy of not having to use glue stick anymore and wipe off prints after saves me suck much time also. I did have to use a little hairspray to help with adhesion and becuase the build plate doesnt have the bambu scan code you do get an error but just have to hit resume but other then that I love it and highly recommend!

I have these for my X1C printer. When you get them to print they are great, but getting them to print correctly takes some work, and you need to print a piece of paper so the camera can tell what plate you're using. I found that you can't use any glue with the glitter plate, it messes stuff up and the rainbow glitter doesn't come through on the print.

I've had one of these impressive Bambu P1S printers since Christmas and every print until now has been perfect - unfortunately the very first print on the smooth PEO side of this PEO/PEI plate immediately failed and I had to abandon the print job. Whether the problem is lack of adhesion or wrong temperature or some other issue, I don't yet know, all I know so far is that this is not a direct substitute for the plate that comes with the machine and cannot be used 'out of the box' with the default parameters and standard Bambu PLA. I'll go read up on it and see if this is something that can be fixed by tweaking the configuration, but if that's what's needed then a note to that effect on the product page would have been welcome - all it says is "PEO build plate surface can print PLA and TPU and PETG." and "suitable for Bambu Lab X1C/X1/X1E/P1P/P1S/A1" with no indication of any config changes being needed. (I don't mind a product that requires some effort to use, I just would have liked to know up front, rather than assuming it would be the completely effortless process that the Bambu system has supplied so far. If the problem is that the proprietary Bambu system doesn't allow 3rd parties to print the QR code on the plate that tells the printer how best to use it, then that would be worth mentioning on the product page as well) ADDENDUM: I found online advice to manually set the build plate type to "Smooth PEI plate/High Temp plate" which I did - the fifth image shows that this did not work either. I only bought this for the smooth side but that's the side that just doesn't work. I'm downgrading my review from 3 to 1 star now that it's more clear that it's not my fault. I should have read the other reviews before buying.

Have been printing on this now for over a week and it is working out great so far. No problems with models not sticking while printing and easy to remove after cooling the plate down. Only thing is that my PS2 does not recognize it but that's not a bi thing for me. I would buy again if the time comes.

If you’re looking for a durable good value for money, this is a really nice bed plate upgrade for your 3-D prints!

Adhesion on this carbon fiber style plate has been great and the effect looks awesome. Love it!

I have only tested the gold pei side, but wow does that side has solid adherence! Fantastic!

marca mucho error y ya se fundió la placa que trae que es tipo vinil

It arrived on time and looked great. Very nice finish. Unfortunately, I could not make my prints stick to it. May try to reorder, maybe it was just this plate.

yeah its adhesion is garbage pla wont even stick to this. dont waste your money or time on this.1 out of 10 well maybe adhere anything with detail or multi color on the first layer and this thing dont work would not recommend texture side needs glue and the fancy pei sides obviously you dont want glue you wont get the effect as clear. so 1 out of 10 imo going to try another brand.