Thermal Grizzly - Conductonaut extreme - 1 Gram - Ultra High Performance Liquid Metal Compound Thermal Paste - For Maximum Thermal Conductivity while Overclocking CPU/GPU/PS4/PS5/Xbox

I had to replace the keyboard in my Lenovo Legion Pro 7i. It is a fairly invasive process and starts with the removal of the cooling solution. I had to strip the laptop down twice, the first time to replace the keyboard and again to replace the fans that were already on their last legs. I believe Lenovo also uses a Gallium based liquid metal alloy, so it seemed the obvious choice. Tools for suction, application of the fresh compound as well as something resembling a cotton but, but definitely more suited to the task is included. Everything needed to reapply the liquid metal as well as instructions were included and application was surprisingly easy. Thermals are finally back to where they need to be. The CPU die generates a lot of heat for such a small surface area and this product is up to the task.

Great product! Had issues with the PS5 overheating and shutting down. Since using the liquid metal the PS5 is running perfectly. Would definitely recommend.

Applied carefully to a delidded i7-7700K according to instructions and a couple of YouTube videos. Left 24 hours for sealant to stick IHS back on. A few hours of HWinfo burn-in test then showed 16C reduction in peak temps compared to before delidding. Following day, after another 5 hours of further burn-in tests, it is running 24C lower than before delidding. Great stuff. Remains to be seen how long it lasts for.

Good Quality, Worked perfect for me but follow the guidelines very carefully to make sure you get it right. Product itself was great came with everything you will need

popped the IHS off my 14900KS, cleaned the old paste with arctic’s cleaner, then went full send with the Conductonaut Extreme. application was a doddle with the included glass needle – no shorts, no mess, just a perfect mirror bead. idle temps dropped from 38 °C (Kryonaut) to 29 °C, and under prime95 small FFTs it now peaks at 81 °C instead of thermal throttling at 100 °C. that’s 19 °C shaved off with a 5.8 GHz all-core OC at 1.38 V. conductivity is mental (73 W/mK my arse – feels like 100+), but you must nickel-plate or use copper IHS or you’ll eat aluminium alive. paired it with the TG Shield just in case. still liquid after 6 months of daily 70 °C gaming, no pump-out, no drying. yes it’s conductive, yes it’ll kill your board if you’re a muppet, but if you know what you’re doing this is the king of TIM. worth every penny

Friend said his PS5 was noisy and running slow and asked me to hava look. Usual dust and thought I’d check the cpu, well didn’t know was metal thermal compound but was definitely the cause as not much was there. Kit was good, lots of bits. I couldn’t really clean the old stuff off well as seams to repel anything so ended up moving to a blob then using the syringe to suck it up as you can reuse it. Spent a while cleaning the surfaces up and reapplied. Deffo didn’t the job or Siri h the issue but dam it’s a hassle and risky incase I got it over the motherboard as it’s conductive.

Perfect

I can confirm all stuff from thermal Grizzly is good. Worth the money.

very nice unit

Depuis que j'ai changé le liquide metal de ma PS5 elle ne s'arrête plus pour "Surchauffe" donc recommande sérieusement ce produit.

yo la utilice para mi ps5 y ya no se apaga sola,y esto era por el metal que trae de fábrica la play ,le puse esta y ya casi un año y funcionando sin problema

今年で6年目を迎えるゲーミングノート、無事復活！ 2年ほど前からサーマルスロットリングにかかるようになりファンの清掃など誤魔化して使ってましたが、R6SやApexが「最低設定+60FPS制限」でもギリギリの動作に…。 しかし、中設定でも快適に動くようになりました。 液体金属は塗るのに不安はありましたが、純正で使用されていたのもあり壊す覚悟で購入。 綿棒、細口の先端以外にもカプトンテープが入っており嬉しいポイントでした。 ただ塗布前の掃除が面倒で無水エタノールで拭いても拭いても黒く… 結局同時並行でGPUグリスなど交換してたのもあり組立まで3時間かかりました_('ཀ`」 ∠)_ が！！！！満足できる結果が出たので嬉しい限りです。 CPU(右)にExtreme、GPU(左)は使用しているグリスの情報がなかったためDuronautを塗布 …掃除前の写真見たらGPUも液体金属かもぉ PC: ASUS ROG (G732LXS) CPU:i9-10980HK GPU:RTX2080Super

This liquid metal thermal compound is incredible! Dropped my CPU temps by over 10°C and made my system quieter by reducing fan noise. It’s easy to install and spreads evenly with just the right thickness. Excellent functionality, simple to use, and fantastic value for high-performance cooling totally worth it!