Single LCD LED TFT Monitor Arm Desk Mount Stand Bracket Clamp Fully Adjustable/Tilt/Articulating for 1 VESA Screen up to 27" inches by Allsortsoutlet

I have 3 of these monitor arms, all different brands and similar priced, 2 are used in my office every day and one is slightly more heavy duty but basically the same. Although the other 2 are fine this is actually that bit better. I bought this for my daughters bedroom to free up desk space which it has done. I have handed down my old 27" LG monitor and it mounted and handled it fine. I have mounted a range of sizes on the other arms 32" is usually the limit dependent on model and weight, but most will do 19-27" with ease. If you use the clamp, a limitation of all of these monitor clamps is the length of the securing bolt/handle/knob at the bottom of the clamp. Its often too long and there's not enough clearance under the desk. I had one of these multi platform computer desks and my daughter had a cheap bedroom MDF desk/drawer combo, in both cases there are limited points at which you can mount them using the clamp as a supporting strut/shelf will block the long bolt/knob used to tighten it. The clamp would work better on a proper office desk or traditional solid wood study desk, although it is still secure on cheaper MDF items. Luckily this came with great instructions, all the tools you needed, 3-4 different mounting options. I didn't use the clamp, I drilled a hole for the bolt and used the two additional mounting plates that came in the kit. Works great, and you can mount it anywhere on the desk, but obviously try it out/measure it first before making a permanent hole in your desk! The top mounting plate also has foam backing to reduce marking on the desk and aid stable fixing. None of of the other brands had this. Much better than expected would definitely buy again.

Sturdy, nice. Could do with some handles instead of screws in some places. If you plan to move your monitor a lot, then maybe this is not for you.

2nd one purchased very easy to fit with multiple fittings depending on mounting choice. Very stable and well made at a good price.

its good for the price. it took about 10 minutes build and is made out of all metal and feels strong. please note you will have to mount it to the side of where you want the monitor to be or it will have to stick forward about a foot (as seen in the photo)

These come with both a desk CLAMP fitting and a BOLT THROUGH method. I now have 4 of these on my desk, 1 using the edge clamp and the other 3 using the bolt through (I had to drill a 52mm hole in my desk top for each) The top cover plate in the bolt through method is 100mm diameter so should cover most cable access holes in office desktops if used. It has 2 slots on 1 side (power and DVI/VGA/HDMI) as well as a rubber pad on the underside to protect your desktop surface. You get 2 sets of screws, 1 short for monitors with flat backs and 1 long (including spacers) for monitors with curved backs. The short screws are the 'tool free' variety with a large head. The long screws are normal style bolts. I would recommend you CHECK the size and depth of your fixing holes as not all monitors use the same size bolt and even the same manufacturer has different depths on different makes.

Everything about it is top quality and very easy to put together and is value for money

Articulates smoothly, no different than much higher priced mounts. Tip though, make sure you have clearance at the back of your desk, mine has some wood blocking the clamp and created a nightmare.

Solid and well-made desk mount. Easy enough to put together, has given me some desk space back.