Paxanpax Universal Vacuum Cleaner Mini Attachment Kit with Nozzles, Brushes & Adaptors Fits 30mm, 32mm, 35mm, 38mm Fittings Ideal for Keyboards, Models, Car Interiors & Delicate Cleaning PFC948

Hooked up to my trusty Dyson upright without any issues and cleaned the fans and hard to reach places in my PC really easily (if you strain the hose it will come out though). So it does what you would expect, seems still a little expensive but cheaper than a dedicated pc hoover so happy overall. I covered few of the vents on the hoover insert with insulation tape to make a little stronger and this worked well for even more suction.

My various nerd collections gather a lot of dust, the displayed Lego sets in particular. So far I have been trying to deal with it by using the thinnest vacuum cleaner nozzle covered in mesh wire and a good quality paint brush. This works well apart from the fact that it is a bit of a struggle with the thick vacuum cleaner hose while brushing off dust. So it was time to try something else. This extension set is quite complete and handy in essence. However due to the rotating ventilation slide on the hose adaptor not closing full, it loses quite some pressure - but this is for safety reasons for if I manually block these vents the vacuum cleaner pauses after a while. Also sometimes the individual parts fall apart. But for the rest it is quite a handy set, the flexible white cable in particular, although it could have been just a little linger. The three included nozzles are good. And even though I still use a mesh wire between the parts to collect small pieces that get accidentally sucked up the nozzle tubes are so thin that it will not allow many parts to go through. Given the utility this set provides I think its is very friendly priced.

Great mini adapters for cleaning dust build up out of my gaming PC and laptops. Never use an air duster in any PC, it forces crap into the circuitry and kills GPUs in particular. The part which adapts to most 32mm vacuum nozzels, goes INSIDE the end of your cleaner, using the stepped end. It needs a lttle twisting and force. The vented collar is to reduce the sucking power of your cleaner which can be damaging even on its lowest setting.

Not even close to fitting Dyson but at this price some masking tape is need to block holes from hoover and air holes on adapter and im sure this will work well. The supplied pipe made my house smell so bad that it now lives outdoors until the UV sunlight kills it off. Cheap, small, stinky and doesn’t fit, but can be adapted to do so and clean small areas.

This product has a fatal design flaw....the reducing adaptor that connects to your vacuum has 4 great big vents on the end in addition to the nozzle that connects to the clear plastic hose to connect to the various tools. It looks like if you twist the reducing adaptor end you can close these vents to get the full suction routed through the nozzle and bring it to bear with the attached tools but this is not the case. Turning the nozzle at best reduces these vents aperture by half and as there are 4 of them they still allow you to end up with 80% of the suction lost through these and only 20% being directed through the nozzle, plastic hoze and tool. This product is seriously flawed, I intially thought I had a faulty one that was maybe stuck preventing the vents from closing but then noticed that even if was able to twist it further the vents are so big their aperture would simply start to get bigger again as you would have forced the holes in the outer case across onto the next vent aperture.

I didn't expect the adapters & the ends to be so small but at least they worked to clean my PC's watercooling radiator without damaging the fins. Hopefully I can vacuum the car too, which would take a bit of grinding as the tools are tiny but at least they will get into the small spaces. They work so can't complain too much.

fantastic item gets into every nook and cranny

The adaptor sort of fits Dyson hoses, but the spring clip on those hoses causes a bit of issue. The vents in the adaptor mean there's still sufficient air flow to keep the filtration system alive, so they're worth using. The heads and mini pipes fit using an angled interference fit, so they tend to come apart after a few minutes use, which can be tricky if the head is in some hard-to-reach place. And there are inserts on the brushes that restrict the flow, but you can clip these out if required, at the risk of matting up the bristles. But all that said, it works as a described. The brushes are nice and soft, they dislodge dust OK and it gets sucked up the hose OK, so all in all I'm happy.

Ich habe keine Beschwerden. alles ist pünktlich. ich bin zufrieden

Is zeker goed genoeg om te doen wat het moet doen, voor die prijs.

Pratique pour aspiration de mon poêle à pellet dans les coins

Detta är en fin liten sats med munstycken som man kommer åt och dammsuga överallt. Särskilt lämplig för bilens ytor. Munstyckena med borst är lämpliga för elektronik prylar då man kommer åt runt rattar och knappar. God passform på samtliga komponenter. Jag är nöjd.

Werkt prima