iBrightstar 50W 6ohm Load Resistors for Fix LED Bulb Fast Hyper Flash Turn Signal Blink Error Code

Worked great and fixed the hiper flashing blinkers. Easy to install. LED lights remain bright. Durable just use the c connectors that come with it. Size is great for tight places. No issues with heat.

Works as advertised, nothing bad to say stopped my super fast blinking. No issues with installation, no different than any other one.

STOPS FAST LED BLINKING! These replaced some older resistors that had corroded over time and worked perfectly,..if you have installed LED taillights and now have fast blinkers you need to install these to regulate the voltage. I tried to use the connectors provided, but honestly they are junk,...i twisted the wires together and used my own crimp connectors. problem solved

They got rid of the hyper-flash on my 03 F-150 after I installed LED bulbs on the front turn signals and rear break lights. I used t-tap wire connectors instead of the connectors that were supplied. Had to improvise a little when installing them on the frame as these things get really hot if they're on for a period of time. They dont supply screws so you're on your own there. Happy with the performance so far. We will see how they hold up over time.

iBrightstar 50W 6Ω Load Resistors — LED turn signals now blink as they should! I installed LED turn signals on my motorcycle—they looked cool, but they started blinking rapidly, like a strobe light at a disco. I solved the problem with iBrightstar 50W 6ohm Load Resistors. Easy installation: everything you need is included—resistors, wires, terminals, even zip ties. I connected them according to the diagram (parallel to each turn signal)—10 minutes, and it's ready. No soldering irons, just crimp terminals. After turning them on, the turn signals worked correctly, just like the factory ones: a clear rhythm, without hyper-flashing. The resistors don't get very hot (the aluminum housing dissipates heat), and I securely mounted them under the seat. Not a single malfunction in six months. If you have LED turn signals and "crazy blinking" - get it, don't hesitate. 5/5, works 100%!

As described exelent product this product did solve my car problem the blrinkers were flashing to fast but now all back to normal.

Not so happy with the product. I am not sure if the wire was faulty, cheap or just how it was made but I can say it seemed cheap. I bought these at the beginning at the month. I just got around to installing yesterday. Everything was going well at first. Then came to finding the proper location to put the resistors (they get super hot) so had to do some trial and error of a proper location. What was disappointing was the fact that one of these broke twice from the grounded side. Just out of no where the wire snapped. So had to do it again. On the 2nd time the wire was getting short and I added some thicker grade wire to it to extend the cable. Well as it was being attached the same exact resistor wire snapped again but this time from the metal frame. Before it was an easy fix but now to attach at that point was not going to work. So now I have to make another purchase to install the broken one because one is installed and ready to go. Have to give a 1 star because of the poor quality of materials. I am in the return window but having one installed just right. It is just not feasible and buying one at a local store is not cost effective. I have the 2nd item is made of better quality.

Didn't fix the fast blink

Work well has fixed my problem

Great for Led switchback turn signals super easy install 👌

Good products

Un buen producto y muy eficas funciona muy bien

Works as described.