VEVOR Hydraulic Motorcycle Lift Jack 1500 LBS Capacity ATV Scissor Lift Jack Portable Motorcycle Lift Table with 4 Wheels Hydraulic Foot-Operated Hoist Stand for Motorcycle ATV UTV Powersports

Made my job so easy today. I’m so glad I bought it. They actually install more than expected so I got confused at first trying to follow the instructions but was not a big deal. Figured it out quick enough. But yeah I’m super happy it did what I needed today.

Assembly was a piece of cake; 5-10 minutes maximum. Seems to function well and wheels are a must to quickly rotate the motorcycle into position in the garage.

Had this lift for a week now and have used it on 2 motorcycles and an ATV. Overall, I’m content with this jack stand especially for the price. Quick and easy to assemble and the handle is quickly removed for tight storage. I do really like the fact that you are able to roll/move/reposition the stand with a motorcycle on it. When using the included ratchet straps to secure the motorcycle to the stand, it was very easy to move the entire thing to the wayside and felt confident the bike was secure. Two concerns: the biggest issue is when you lower the Jack stand with weight on it, you cannot control the rate of dissent. It drops very quickly. Watch your fingers and toes.. 2nd minor concern is the attachment points for the included ratchet straps appear to be poorly designed and possibly insufficient for the weight and application. There are alternative ways to attach the straps to the stand that are much more secure.

Very easy to use. It lifted my 800+ pound Road King with no effort. Seems stable and well built. The only negative I have found is that I wish the jack was about 1/2 inch lower because it doesn't slide under the bike when the bike is on the Jiffy Stand. It hits the frame on the low side so I have to sit on the bike and level it to allow the jack to clear the frame. Other than that works well for its intended purpose.

Works well and with ease as advertised. Good quality and had no issues jacking up my ~600 pound motorcycle for a few days while the tires were being changed. It picked up and brought down the motorcycle cycle to different heights during the process with ease. It’s pretty well built.

First off seems like a great bike lift, especially, for the price. Went together fine no missing parts, well packed, instructions sub par. That said, I put it all together and slid the jack under my Honda BIG Ruckus PS250 (overgrown scooter) and jacked up the bike 1". Then tried the lowering pedal to see how easy it would be go down. So I pushed the pedal and It immediately released -but went into FREE FALL 😳 and dropped HARD the 1" to the shop floor. Even from that height the bike bounced off the floor and almost fell over onto me!!! Had the lift been at full height and I'd pushed the foot pedal release, I'd be writing this from the ER...there is NO adjustment to slow the rate of decent it just drops like a rock. There are the 3 "safety" stops but good luck working those when its in free fall! SOOOO at the end of the day I still needed a jack for my bike. Lucky for me I have a welder and an eye bolt and extension nut laying around and welded them to the jack frame to controll the speed of lowering. By screwing the eye bolt in to the base of the foot release I could infinitly controll the drop rate, and surprise it worked GREAT! Anyway I'll be cutting off the pedal to avoid an accidental contact and release. I did read some other reviews that warned of the free fall but dismissed them as user error, it ain't, its just a HORRIBLE design. You just have to wonder if the designer ever used this jack with a 1/2 ton bike on it or anything else for that matter. With my screw release "upgrade" the jack works great. DONT BUY THIS JACK UNLESS YOU CAN MAKE THIS MODIFICATION unless ofcourse you don't like your bike! Well this is a first for me, I've never had to update a review, but after figuring out a way to actually lower my bike safely I raised it fully and discovered that under the load of my bike the safety catch missed locking into the last cog by about 3/8"!!! The good news is if you remove the locking mechanism arm from the frame mounts then insert behind the last cog you will be able to reinstall the locking arn back into its brackets and thereby locking the jack in the fully up position. Yes you could also grind it down to fit so that it actually worked! I'm storing my bike on this jack so this is an inconvenience for me but a pain in the neck (and unsafe) if your trying to use it as designed(?). If your really using a jack like this a lot I'd recommend spending more and buying a better quality product especially when you consider the kinda damage a 1000 pound bike can do to your body falling 17 inches on top of you...just saying 😉

Good Price Fast Shipping

It says it will hold up to 1500lbs BUT Does Not hold more than 800lbs.. My bike is 835lbs and the lift slowly drops. I wish I used it sooner so I can return it!!

Top

La qualità percepita è buona per il prezzo richiesto. L'ho subito testato su un Harley Davidson Forty Eight, ed è perfetto. La moto è molto stabile. Comodissimo per manutenzione, lavaggio moto etc...

So pleased with this for the money lifts my Honda Africa no bother perfect and good strong quality

Le leve moto est pratiquement monté Très facile d'utilisation Utile pour laver les jantes et entretenir les motos. Je recommande ce produit

Robusto y estable. De fácil manejo. Valoro muy positivamente los cinchas para sujetar la moto. No están de más