4pcs 1.25" 6x5.5 to 6x5.5 Hub Centric Wheel Spacers 106mm Bore 12X1.5 Studs Compatible for Toyota Tacoma 4runner FJ Cruiser Land Cruiser Sequoia Lexus GX470 GX460 HL450 Black

They fit nicely and work great! But you will need to get extended lug nuts on your tacoma so you have more lug to tighten to so that the spacer sits better.

If you use a closed end lug nut (or the common gorilla spline aftermarket ones tons of people run with aftermarket wheels) for 2nd/3rd gen Tacoma’s, you will need to buy open ended ones as the studs will be too long to seat the lug nut properly. Other than that small issue I ran into everything else went well.

Really appreciate the fast shipping and overall the quality of the product. It seems very sturdy and with heavy duty hardware yeah it does feel light.The set came with directions and followed it step-by-step. Are use Loctite blue and torqued Spacers down to the suggested 90-100fpt @ 95.Put my wheels on and made such a huge difference. The wheels are 18 x 10 with a -20 offset. I’m running 35 x 12.5 Tires. Drove it around for a few days then re-torqued it after about 50 miles. Then took it offroading and noticed that my tacoma seemed A bit more stable and balanced? It’s rolls smooth as always but going over to rain and just on basic fire roads, it seemed that it was more reactive to turning and was responsive. Nothing else has changed on the car inside the spacers. I guess a wider stance doesn’t make it seem so top-heavy + the looks are much more aggressive.

No vibration

That said, to no fault of this company, this was my second attempt to get the correct part. As has often been the case with vehicle parts on Amazon, the part is listed on Amazon in black & white as compatible with the make, model, year, etc. and it is NOT. This kind of false advertising has completely turned me off of Amazon for parts and accessories. Just too unreliable.This part was correct and worked great - but there's no way to know without ordering pot-luck fashion.

Made the stance of my truck look better

Do not use for front spacers on GX460.Went to 275/70R18 tires and learned I’d need spacers to clear the UCAs in the front.Ordered this set because they would arrive in time.They were packaged very well and look great.The hardware looked well made and machining was nice.The huge glaring flaw is that the front studs on the GX460 are shorter than the rears, so you can’t thread the bits all the way on which is a HUGE safety issue.The rears worked fine and the studs were flush with the ends of the nuts when torqued but the front ones are too short. They didn’t machine them deep enough for the cone nuts to recess down to allow the entire thread to be engaged.Even with Loc Tite I cannot trust these. Now I’m stuck with them until I get some Spidertrax for the front because I can’t mount the tires without them.

Driven about 100 miles on them- no problems so far. I’ll keep checking to make sure they stay tight, but half the price of the other guys- just make sure to follow bolt pattern instructions!