2 Pack Ceiling Fan Lamp Replacement, 6.69 inch Dimmable 3CCT 3000K/4000K/5000K 36W 3200LM, Ceiling Fan LED Light Kit Replacement, LED Light Engine Retrofit Kit

I have been looking for a bright light for my ceiling fan light. Got the brightest LED candelabra bulbs (2) and I'm still wanting to get a brighter light so I thought I'd try these.Installation can be easy or difficult depending on your fixture. In my case it took me a while to figure out how to install it as neither the center hole or the slotted holes where of no help. Eventually the magnets saved the day and kept the piece in place.Light output is great at the 5000k setting, which I didn't like as the lights in my bedroom were all 2600-3000K. The 4000K setting looked less white but also decreased the light intensity. 3000K color was more to my liking (and matched the color output of the other lamps in the room) but the light output was diminished considerably. In the end it is just slightly brighter than the 2 LED candelabra bulbs I had before although the light dissipation is better since it is more even, coming from 360 degrees.

Love the brightness of the lights

This was almost exactly what I needed to replace the original lights in our ceiling fan after they went dead during an electrical outage from a storm. They're nice and bright. The only reason I gave 4 stars instead of 5 is that they don't come on right away when you turn on the light switch. There's about a 3-5 second delay

Quality product. With the magnets it is a breeze to install

I purchased 2 new smart ceiling fans expecting the light source to be a smooth even warm white light behind the frosted glass dome, well for some reason the manufacturer cheated out and used 2 cheapo LED bulbs that look terrible behind the frosted glass dome. This replacement LED disc fixed the spotty lights of the screw in led bulbs and now the fan light looks great. The disc is easy to install - just clip the wires of the screw in bulb sockets and remove. Wire the disc to the clipped wires with the included wire nuts and attach to the fan using the pre-installed magnets on the back of the disc. Very easy to do. The disc has switchable light temperature from warm to cold. I chose the warm setting to match the rest of my filament bulbs in my lake house. I highly recommend this for anyone who wants a smooth even light and hates screw in bulbs inside their light fixture. I suggest only using this disc with frosted glass covers to help diffuse the LED's.

Working great

I moved to a dark house with ceiling fans in each room. These greatly changed the feel of the house. The wiring required was tricky. For safety be sure to put wire nuts INSIDE the existing light kit’s metal housing.

I used them to replace yellow lights on 2 home depot fans.. so far so good. True white > day lights...which i love.

Muy buena luz. Los tres tonos se ven fantásticos. Se pudo adaptar fácilmente a un ventilador de techo que usaba lámparas de cuarzo. El diámetro del círculo de LEDs da una muy buena cantidad de luz. Fácil de instalar y versátil.

Compré estás lámparas ya por segunda ocasión porque me parecieron excelentes en su construcción, aspecto y operación. Las utilice para reemplazar el socket en lámparas de techo redondas metálicas. Cómo estás traen magnetos fue muy fácil montarlas sin necesidad de atornillar. Coloqué un pequeño dimmer oculto en la lámpara y ajuste a la intensidad requerida porque estás son de 24w y el area en qué las uso requieren como 8W en LED. Traen un switch de 3 posiciones para seleccionar entre dos temperaturas de color (cálida y fría) y en otra posición trabajan los dos colores dando la sensación de un color intermedio.Llegaron en el tiempo indicado a la hora de comprar y en perfecto estado.

Es un repuesto que incluye leds de luz color ámbar y blanco lo que hace reducir la iluminación en un 50 % cuando debería iluminar de 36 watts