Mellow 1.6 Inch Metal Bunkie Board Mattress Support for Bed Frames, Box Spring or Bed Slat Replacement, Easy Assembly, Queen, Black

I recently upgraded to a heavy memory foam mattress for my IKEA queen Trysil bed frame. I was using a model of IKEA slats that were purchased with the bed many years ago. With the new mattress, I immediately noticed that the old IKEA slats seemed to be sagging and unable to serve as a solid base for the mattress like the manufacturer recommends. I needed to find a solution that would let the mattress breathe while serving as a flat, solid platform (unlike the worn out "suspension" style of uneven IKEA slats I was using).I was disappointed at first because I thought this problem might require purchasing an entirely new bed frame - I didn't want to replace the slats with a new set of IKEA ones, since I figured the same problems would surface over time due to the company's lightweight construction. Then I fortunately stumbled across this as a solution.The Mellow slat system arrived quickly and in perfect condition. My biggest concern was that the size or design would be incompatible with the underlying support structure built into the IKEA frame, but I quickly found out the Mellow system fit perfectly. The Trysil bed has two side rails and a center bar, and the Mellow slat frame aligned with this very well so I knew it would be structurally sound.The only "downside" about the Mellow fit was that there were a couple inches of a gap which would allow the Mellow slat frame to slide around inside the bed frame, but this was easily solved by using some of the soft foam padding from the Mellow packaging to wedge in between gaps on all four sides. I can't knock Mellow for this because I understand the product isn't designed specifically for the model of bed I have - the dimensions still worked and just required the small "hack" to get a perfectly secure fit to eliminate the possibility of sliding. My guess is that the size of the Mellow system allows it to work universally with a number of different bed frames, but I would still recommend that other purchasers measure their bed's internal structure to make sure this would be compatible.The construction was incredibly simple even for a lone person like myself. The queen size comes with a lengthwise bar that has a foam strip on it, which I assumed should be turned so the foam would rest on the wooden slat side to reduce noise, which it seems to do well as there is no noise from my mattress after putting it back on the frame.The height of my mattress ended up being slightly lower than it was with the IKEA slats, because the Mellow system has a lower thickness than the curved slats on the IKEA model. I personally prefer this lower profile since my thick mattress ends up at a perfect height with my nightstands.Overall, I'm extremely satisfied with this solution. It was much cheaper and more convenient than buying a new bed frame. I'm able to sleep comfortably knowing my new mattress is properly supported, which allows it to work as designed and hopefully have better longevity due to a solid support system. I would definitely recommend this to anyone in a similar predicament, as long as you measure your bed carefully to make sure this will work with your existing bed frame like it did with mine.

Super sturdy! The results are easy to assemble but the velcro isn't stuck great so when I need to lift them (rarely) I do have to be extra careful in some sections. It's low profile, great replacement for a box spring. It does not shift or make noise. Fits queen perfectly.

We purchased a full sized mattress and box-spring for my daughter's bed frame. Even the low-profile box-spring made the mattress sit far too high. I'd never heard of a "Bunkie Board" but after reading many reviews we landed on this one. This Bunkie Board is a great value ($100 less than the box-spring)! It's very sturdy and was easy to assemble (15 minutes). It fits inside the frame rails perfectly, but I would suggest leaving the existing cross supports in place if you have them (we did). The board provides excellent support for the mattress with very little movement and absolutely zero added noise.

good frame. extremely easy to put together. maybe like an inch and a half too small for my bed, but i kept the original wooden slats on & placed the frame on top. worked perfectly. feels great, not worried about it falling or anything. no real complaints.

I really enjoy the bed on the floor look but can’t seem to find a frame low enough that doesn’t cost an arm and a leg, so I decided to go with this and see how it does. I like the look, the price was perfect, and it took 40 minutes or so to put together. Not sure how I feel about the sticky stuff, but could be a pro. I purchased a queen and I feel like it fit my queen mattress just fine. Doesn’t seem to make any noise so far and my dogs jump on and off the bed plenty.

We ordered the bunkie board as a way to allow airflow under the new memory foam mattress that we purchased for our RV. It was incredibly easy to put together (hex wrench included) and fit both the designated space and the mattress perfectly. The spacing between the slats is just slightly more than recommended for the mattress, but it should work. The center support is a win! I love how sturdy it feels, and wouldn't hesitate to use it with a regular bedframe as well as on the solid wood platform of the RV. I chose not to use the adhesive since the mattress is supposed to be rotated every 6 months or so, and it wouldn't do to have the frame stuck to the mattress.

Seller has no communication to address a problem with this. While the unit is okay, it came with an incorrectly manufactured slat that will not insert in place properly. I have emailed the company several times and originally received a bogus, clearly AI response because it addressed literally nothing I was talking about and accused me of assembling it incorrectly. Clearly their AI does not analyze photos. I responded and asked for an actually response from someone, it has been weeks and nothing, despite several emails, calls and reaching out to Amazon support whom simply gave me the same contact information from them. Again the unit is okay, but forget it if you need any kind of support. This company is garbage from a support perspective. Do not recommend.

I never realized what a difference a box spring or bunkie board could make under your mattress. We've kept the same old box spring for years -through 3 mattresses. We were about to buy a new mattress and decided to do this first to lower the bed for my wife. That mattress is now so comfortable that we're keeping it for the foreseeable future.With its own metal frame, this is a sturdy product once put together. Yeah, I'd like to talk to their engineers about assembly - one small change that would cost them $0 would make this easier on your knuckles. But, once together, it's very sturdy. There are some non-slip pieces on top of the wood that are supposed to stop your mattress from sliding around. I was skeptical but they work! I had trouble getting my mattress into place because of these - I had to lift it into its proper place. Now that it's there, that mattress isn't going anywhere.