ID-COOLING SE-207-XT Slim 135mm Height All-Black CPU Cooler 7 Heat Pipes Dual-Tower CPU Air Cooler with 120mm PWM Fan TDP 220W, CPU Fan for Intel 1700/1200/115X, AMD AM5/AM4

Just built a new system with a ryzen 5600x and was hoping the stock cooler would be enough...it was not. It worked just enough to not be super dangerous but not without throttling with high cpu loads. It would "idle" somewhere in the neighborhood of 38 to 45 c and would jump straight to 95c in cenebench, which I guess is fair at 100 percent load but the cpu wasn't even able to maintain boost clock for more than half a pass. I did have a corsair h80i I was hoping would fit in the new case but the long and the short it didn't. I was going to try a hyper 212 but happened to see this guy that had more heat pipes, a more polished heat plate and a quieter fan for basically the same price. anyway this is a super long winded way of saying that this cooler kicks ass for how cheap it was. i can have the fan at 20 percent, which is essentially silent till about 50 percent, and maintain mid 30 degree temps during light loads then bump up to maybe 50 percent while gaming and never see more than 60 degrees. Couple notes for future buyers, there's a couple reviews saying the thermal paste is subpar, I squeezed a bit out and it was a tad thick but mostly who knows who actually makes it so I used some artic mx-4 just so I didn't have to do it twice. the mounting method is pretty simple for amd but if you have a smaller case you may want to plug the fan in before mounting the cooler, the fan cable is super long so plan for a little cable managing. felt dumb after I mounted it, I should have routed it behind the mobo and back out near the connector rather than doing a full wrap around the fan but you win some you loose some.

I was having issues with very high cpu temps on certain games on my i5 10400f with the stock cooler. For example on rust I was getting temps of around 85-90 when game was running. After installing this cooler the highest I've seen my temps reach is 58 degrees. Installation was a little annoying but nothing major, took me about an hour all in. I'm very happy with this purchase excellent value for money and looks very clean inside the case. Highly recommend.

Simple Aesthetic, keeps my 3700x around 45° at under 32dms, good pick for larger ITX builds

Dieser CPU Kühler sitzt bei mir im HT/PC Gehäuse.Da er nur gut 12cm Hoch ist!! und mein Gehäuse bis 14 cm Höhe zulässt ist das genau der richtige Kühler!! Bin voll zufrieden mit der Leistung des Kühlers!!

L'ho scelto per il suo aspetto: mi piace questo richiamo a dissipatori dual tower ben più famosi. E' efficiente, fa il suo persino su di un 7800X3D, tenendolo a bada discretamente bene. Più avanti, forse, potrei pensare di sostituire la ventola con una più performante, ma dico la verità: va già bene così com'è. Per di più è anche bello compatto, con una altezza di soli 135 mm se non erro, che gli permette di essere installato anche su sistemi meno generosi in fatto di compatibilità, come ad esempio diversi case mini-itx. Mi ritengo soddisfatto: tolgo una stella per due ragioni, ossia la ventola (migliorabile come specifiche tecniche, ma non drammatica nell'uso quotidiano) ed il costo, che potrebbe essere più contenuto, vits al amrca non certo famosa qui in europa